readertest.cpp

Go to the documentation of this file.

// Tencent is pleased to support the open source community by making RapidJSON available.
//
// Copyright (C) 2015 THL A29 Limited, a Tencent company, and Milo Yip. All rights reserved.
//
// Licensed under the MIT License (the "License"); you may not use this file except
// in compliance with the License. You may obtain a copy of the License at
//
// http://opensource.org/licenses/MIT
//
// Unless required by applicable law or agreed to in writing, software distributed
// under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
// CONDITIONS OF ANY KIND, either express or implied. See the License for the
// specific language governing permissions and limitations under the License.
 
#include "unittest.h"
 
#include "rapidjson/reader.h"
#include "rapidjson/internal/dtoa.h"
#include "rapidjson/internal/itoa.h"
#include "rapidjson/memorystream.h"
 
#include <limits>
 
using namespace rapidjson;
 
RAPIDJSON_DIAG_PUSH
#ifdef __GNUC__
RAPIDJSON_DIAG_OFF(effc++)
RAPIDJSON_DIAG_OFF(float-equal)
RAPIDJSON_DIAG_OFF(missing-noreturn)
#if __GNUC__ >= 7
RAPIDJSON_DIAG_OFF(dangling-else)
#endif
#endif // __GNUC__
 
#ifdef __clang__
RAPIDJSON_DIAG_OFF(variadic-macros)
RAPIDJSON_DIAG_OFF(c++98-compat-pedantic)
#endif
 
template<bool expect>
struct ParseBoolHandler : BaseReaderHandler<UTF8<>, ParseBoolHandler<expect> > {
    ParseBoolHandler() : step_(0) {}
    bool Default() { ADD_FAILURE(); return false; }
    // gcc 4.8.x generates warning in EXPECT_EQ(bool, bool) on this gtest version.
    // Workaround with EXPECT_TRUE().
    bool Bool(bool b) { /*EXPECT_EQ(expect, b); */EXPECT_TRUE(expect == b);  ++step_; return true; }
 
    unsigned step_;
};
 
TEST(Reader, ParseTrue) {
    StringStream s("true");
    ParseBoolHandler<true> h;
    Reader reader;
    reader.Parse(s, h);
    EXPECT_EQ(1u, h.step_);
}
 
TEST(Reader, ParseFalse) {
    StringStream s("false");
    ParseBoolHandler<false> h;
    Reader reader;
    reader.Parse(s, h);
    EXPECT_EQ(1u, h.step_);
}
 
struct ParseIntHandler : BaseReaderHandler<UTF8<>, ParseIntHandler> {
    ParseIntHandler() : step_(0), actual_() {}
    bool Default() { ADD_FAILURE(); return false; }
    bool Int(int i) { actual_ = i; step_++; return true; }
 
    unsigned step_;
    int actual_;
};
 
struct ParseUintHandler : BaseReaderHandler<UTF8<>, ParseUintHandler> {
    ParseUintHandler() : step_(0), actual_() {}
    bool Default() { ADD_FAILURE(); return false; }
    bool Uint(unsigned i) { actual_ = i; step_++; return true; }
 
    unsigned step_;
    unsigned actual_;
};
 
struct ParseInt64Handler : BaseReaderHandler<UTF8<>, ParseInt64Handler> {
    ParseInt64Handler() : step_(0), actual_() {}
    bool Default() { ADD_FAILURE(); return false; }
    bool Int64(int64_t i) { actual_ = i; step_++; return true; }
 
    unsigned step_;
    int64_t actual_;
};
 
struct ParseUint64Handler : BaseReaderHandler<UTF8<>, ParseUint64Handler> {
    ParseUint64Handler() : step_(0), actual_() {}
    bool Default() { ADD_FAILURE(); return false; }
    bool Uint64(uint64_t i) { actual_ = i; step_++; return true; }
 
    unsigned step_;
    uint64_t actual_;
};
 
struct ParseDoubleHandler : BaseReaderHandler<UTF8<>, ParseDoubleHandler> {
    ParseDoubleHandler() : step_(0), actual_() {}
    bool Default() { ADD_FAILURE(); return false; }
    bool Double(double d) { actual_ = d; step_++; return true; }
 
    unsigned step_;
    double actual_;
};
 
TEST(Reader, ParseNumber_Integer) {
#define TEST_INTEGER(Handler, str, x) \
    { \
        StringStream s(str); \
        Handler h; \
        Reader reader; \
        reader.Parse(s, h); \
        EXPECT_EQ(1u, h.step_); \
        EXPECT_EQ(x, h.actual_); \
    }
 
    TEST_INTEGER(ParseUintHandler, "0", 0u);
    TEST_INTEGER(ParseUintHandler, "123", 123u);
    TEST_INTEGER(ParseUintHandler, "2147483648", 2147483648u);       // 2^31 - 1 (cannot be stored in int)
    TEST_INTEGER(ParseUintHandler, "4294967295", 4294967295u);
 
    TEST_INTEGER(ParseIntHandler, "-123", -123);
    TEST_INTEGER(ParseIntHandler, "-2147483648", static_cast<int32_t>(0x80000000));     // -2^31 (min of int)
 
    TEST_INTEGER(ParseUint64Handler, "4294967296", RAPIDJSON_UINT64_C2(1, 0));   // 2^32 (max of unsigned + 1, force to use uint64_t)
    TEST_INTEGER(ParseUint64Handler, "18446744073709551615", RAPIDJSON_UINT64_C2(0xFFFFFFFF, 0xFFFFFFFF));   // 2^64 - 1 (max of uint64_t)
 
    TEST_INTEGER(ParseInt64Handler, "-2147483649", static_cast<int64_t>(RAPIDJSON_UINT64_C2(0xFFFFFFFF, 0x7FFFFFFF)));   // -2^31 -1 (min of int - 1, force to use int64_t)
    TEST_INTEGER(ParseInt64Handler, "-9223372036854775808", static_cast<int64_t>(RAPIDJSON_UINT64_C2(0x80000000, 0x00000000)));       // -2^63 (min of int64_t)
 
    // Random test for uint32_t/int32_t
    {
        union {
            uint32_t u;
            int32_t i;
        }u;
        Random r;
 
        for (unsigned i = 0; i < 100000; i++) {
            u.u = r();
 
            char buffer[32];
            *internal::u32toa(u.u, buffer) = '\0';
            TEST_INTEGER(ParseUintHandler, buffer, u.u);
 
            if (u.i < 0) {
                *internal::i32toa(u.i, buffer) = '\0';
                TEST_INTEGER(ParseIntHandler, buffer, u.i);
            }
        }
    }
 
    // Random test for uint64_t/int64_t
    {
        union {
            uint64_t u;
            int64_t i;
        }u;
        Random r;
 
        for (unsigned i = 0; i < 100000; i++) {
            u.u = uint64_t(r()) << 32;
            u.u |= r();
 
            char buffer[32];
            if (u.u > uint64_t(4294967295u)) {
                *internal::u64toa(u.u, buffer) = '\0';
                TEST_INTEGER(ParseUint64Handler, buffer, u.u);
            }
 
            if (u.i < -int64_t(2147483648u)) {
                *internal::i64toa(u.i, buffer) = '\0';
                TEST_INTEGER(ParseInt64Handler, buffer, u.i);
            }
        }
    }
#undef TEST_INTEGER
}
 
template<bool fullPrecision>
static void TestParseDouble() {
#define TEST_DOUBLE(fullPrecision, str, x) \
    { \
        StringStream s(str); \
        ParseDoubleHandler h; \
        Reader reader; \
        ASSERT_EQ(kParseErrorNone, reader.Parse<fullPrecision ? kParseFullPrecisionFlag : 0>(s, h).Code()); \
        EXPECT_EQ(1u, h.step_); \
        internal::Double e(x), a(h.actual_); \
        if (fullPrecision) { \
            EXPECT_EQ(e.Uint64Value(), a.Uint64Value()); \
            if (e.Uint64Value() != a.Uint64Value()) \
                printf("  String: %s\n  Actual: %.17g\nExpected: %.17g\n", str, h.actual_, x); \
        } \
        else { \
            EXPECT_EQ(e.Sign(), a.Sign()); /* for 0.0 != -0.0 */ \
            EXPECT_DOUBLE_EQ(x, h.actual_); \
        } \
    }
 
    TEST_DOUBLE(fullPrecision, "0.0", 0.0);
    TEST_DOUBLE(fullPrecision, "-0.0", -0.0); // For checking issue #289
    TEST_DOUBLE(fullPrecision, "0e100", 0.0); // For checking issue #1249
    TEST_DOUBLE(fullPrecision, "1.0", 1.0);
    TEST_DOUBLE(fullPrecision, "-1.0", -1.0);
    TEST_DOUBLE(fullPrecision, "1.5", 1.5);
    TEST_DOUBLE(fullPrecision, "-1.5", -1.5);
    TEST_DOUBLE(fullPrecision, "3.1416", 3.1416);
    TEST_DOUBLE(fullPrecision, "1E10", 1E10);
    TEST_DOUBLE(fullPrecision, "1e10", 1e10);
    TEST_DOUBLE(fullPrecision, "1E+10", 1E+10);
    TEST_DOUBLE(fullPrecision, "1E-10", 1E-10);
    TEST_DOUBLE(fullPrecision, "-1E10", -1E10);
    TEST_DOUBLE(fullPrecision, "-1e10", -1e10);
    TEST_DOUBLE(fullPrecision, "-1E+10", -1E+10);
    TEST_DOUBLE(fullPrecision, "-1E-10", -1E-10);
    TEST_DOUBLE(fullPrecision, "1.234E+10", 1.234E+10);
    TEST_DOUBLE(fullPrecision, "1.234E-10", 1.234E-10);
    TEST_DOUBLE(fullPrecision, "1.79769e+308", 1.79769e+308);
    TEST_DOUBLE(fullPrecision, "2.22507e-308", 2.22507e-308);
    TEST_DOUBLE(fullPrecision, "-1.79769e+308", -1.79769e+308);
    TEST_DOUBLE(fullPrecision, "-2.22507e-308", -2.22507e-308);
    TEST_DOUBLE(fullPrecision, "4.9406564584124654e-324", 4.9406564584124654e-324); // minimum denormal
    TEST_DOUBLE(fullPrecision, "2.2250738585072009e-308", 2.2250738585072009e-308); // Max subnormal double
    TEST_DOUBLE(fullPrecision, "2.2250738585072014e-308", 2.2250738585072014e-308); // Min normal positive double
    TEST_DOUBLE(fullPrecision, "1.7976931348623157e+308", 1.7976931348623157e+308); // Max double
    TEST_DOUBLE(fullPrecision, "1e-10000", 0.0);                                    // must underflow
    TEST_DOUBLE(fullPrecision, "18446744073709551616", 18446744073709551616.0);     // 2^64 (max of uint64_t + 1, force to use double)
    TEST_DOUBLE(fullPrecision, "-9223372036854775809", -9223372036854775809.0);     // -2^63 - 1(min of int64_t + 1, force to use double)
    TEST_DOUBLE(fullPrecision, "0.9868011474609375", 0.9868011474609375);           // https://github.com/Tencent/rapidjson/issues/120
    TEST_DOUBLE(fullPrecision, "123e34", 123e34);                                   // Fast Path Cases In Disguise
    TEST_DOUBLE(fullPrecision, "45913141877270640000.0", 45913141877270640000.0);
    TEST_DOUBLE(fullPrecision, "2.2250738585072011e-308", 2.2250738585072011e-308); // http://www.exploringbinary.com/php-hangs-on-numeric-value-2-2250738585072011e-308/
    TEST_DOUBLE(fullPrecision, "1e-00011111111111", 0.0);                           // Issue #313
    TEST_DOUBLE(fullPrecision, "-1e-00011111111111", -0.0);
    TEST_DOUBLE(fullPrecision, "1e-214748363", 0.0);                                  // Maximum supported negative exponent
    TEST_DOUBLE(fullPrecision, "1e-214748364", 0.0);
    TEST_DOUBLE(fullPrecision, "1e-21474836311", 0.0);
    TEST_DOUBLE(fullPrecision, "1.00000000001e-2147483638", 0.0);
    TEST_DOUBLE(fullPrecision, "0.017976931348623157e+310", 1.7976931348623157e+308); // Max double in another form
    TEST_DOUBLE(fullPrecision, "128.74836467836484838364836483643636483648e-336", 0.0); // Issue #1251
 
    // Since
    // abs((2^-1022 - 2^-1074) - 2.2250738585072012e-308) = 3.109754131239141401123495768877590405345064751974375599... x 10^-324
    // abs((2^-1022) - 2.2250738585072012e-308) = 1.830902327173324040642192159804623318305533274168872044... x 10 ^ -324
    // So 2.2250738585072012e-308 should round to 2^-1022 = 2.2250738585072014e-308
    TEST_DOUBLE(fullPrecision, "2.2250738585072012e-308", 2.2250738585072014e-308); // http://www.exploringbinary.com/java-hangs-when-converting-2-2250738585072012e-308/
 
    // More closer to normal/subnormal boundary
    // boundary = 2^-1022 - 2^-1075 = 2.225073858507201136057409796709131975934819546351645648... x 10^-308
    TEST_DOUBLE(fullPrecision, "2.22507385850720113605740979670913197593481954635164564e-308", 2.2250738585072009e-308);
    TEST_DOUBLE(fullPrecision, "2.22507385850720113605740979670913197593481954635164565e-308", 2.2250738585072014e-308);
 
    // 1.0 is in (1.0 - 2^-54, 1.0 + 2^-53)
    // 1.0 - 2^-54 = 0.999999999999999944488848768742172978818416595458984375
    TEST_DOUBLE(fullPrecision, "0.999999999999999944488848768742172978818416595458984375", 1.0); // round to even
    TEST_DOUBLE(fullPrecision, "0.999999999999999944488848768742172978818416595458984374", 0.99999999999999989); // previous double
    TEST_DOUBLE(fullPrecision, "0.999999999999999944488848768742172978818416595458984376", 1.0); // next double
    // 1.0 + 2^-53 = 1.00000000000000011102230246251565404236316680908203125
    TEST_DOUBLE(fullPrecision, "1.00000000000000011102230246251565404236316680908203125", 1.0); // round to even
    TEST_DOUBLE(fullPrecision, "1.00000000000000011102230246251565404236316680908203124", 1.0); // previous double
    TEST_DOUBLE(fullPrecision, "1.00000000000000011102230246251565404236316680908203126", 1.00000000000000022); // next double
 
    // Numbers from https://github.com/floitsch/double-conversion/blob/master/test/cctest/test-strtod.cc
 
    TEST_DOUBLE(fullPrecision, "72057594037927928.0", 72057594037927928.0);
    TEST_DOUBLE(fullPrecision, "72057594037927936.0", 72057594037927936.0);
    TEST_DOUBLE(fullPrecision, "72057594037927932.0", 72057594037927936.0);
    TEST_DOUBLE(fullPrecision, "7205759403792793199999e-5", 72057594037927928.0);
    TEST_DOUBLE(fullPrecision, "7205759403792793200001e-5", 72057594037927936.0);
 
    TEST_DOUBLE(fullPrecision, "9223372036854774784.0", 9223372036854774784.0);
    TEST_DOUBLE(fullPrecision, "9223372036854775808.0", 9223372036854775808.0);
    TEST_DOUBLE(fullPrecision, "9223372036854775296.0", 9223372036854775808.0);
    TEST_DOUBLE(fullPrecision, "922337203685477529599999e-5", 9223372036854774784.0);
    TEST_DOUBLE(fullPrecision, "922337203685477529600001e-5", 9223372036854775808.0);
 
    TEST_DOUBLE(fullPrecision, "10141204801825834086073718800384", 10141204801825834086073718800384.0);
    TEST_DOUBLE(fullPrecision, "10141204801825835211973625643008", 10141204801825835211973625643008.0);
    TEST_DOUBLE(fullPrecision, "10141204801825834649023672221696", 10141204801825835211973625643008.0);
    TEST_DOUBLE(fullPrecision, "1014120480182583464902367222169599999e-5", 10141204801825834086073718800384.0);
    TEST_DOUBLE(fullPrecision, "1014120480182583464902367222169600001e-5", 10141204801825835211973625643008.0);
 
    TEST_DOUBLE(fullPrecision, "5708990770823838890407843763683279797179383808", 5708990770823838890407843763683279797179383808.0);
    TEST_DOUBLE(fullPrecision, "5708990770823839524233143877797980545530986496", 5708990770823839524233143877797980545530986496.0);
    TEST_DOUBLE(fullPrecision, "5708990770823839207320493820740630171355185152", 5708990770823839524233143877797980545530986496.0);
    TEST_DOUBLE(fullPrecision, "5708990770823839207320493820740630171355185151999e-3", 5708990770823838890407843763683279797179383808.0);
    TEST_DOUBLE(fullPrecision, "5708990770823839207320493820740630171355185152001e-3", 5708990770823839524233143877797980545530986496.0);
 
    {
        char n1e308[310];   // '1' followed by 308 '0'
        n1e308[0] = '1';
        for (int i = 1; i < 309; i++)
            n1e308[i] = '0';
        n1e308[309] = '\0';
        TEST_DOUBLE(fullPrecision, n1e308, 1E308);
    }
 
    // Cover trimming
    TEST_DOUBLE(fullPrecision,
"2.22507385850720113605740979670913197593481954635164564802342610972482222202107694551652952390813508"
"7914149158913039621106870086438694594645527657207407820621743379988141063267329253552286881372149012"
"9811224514518898490572223072852551331557550159143974763979834118019993239625482890171070818506906306"
"6665599493827577257201576306269066333264756530000924588831643303777979186961204949739037782970490505"
"1080609940730262937128958950003583799967207254304360284078895771796150945516748243471030702609144621"
"5722898802581825451803257070188608721131280795122334262883686223215037756666225039825343359745688844"
"2390026549819838548794829220689472168983109969836584681402285424333066033985088644580400103493397042"
"7567186443383770486037861622771738545623065874679014086723327636718751234567890123456789012345678901"
"e-308",
    2.2250738585072014e-308);
 
    {
        static const unsigned count = 100; // Tested with 1000000 locally
        Random r;
        Reader reader; // Reusing reader to prevent heap allocation
 
        // Exhaustively test different exponents with random significant
        for (uint64_t exp = 0; exp < 2047; exp++) {
            ;
            for (unsigned i = 0; i < count; i++) {
                // Need to call r() in two statements for cross-platform coherent sequence.
                uint64_t u = (exp << 52) | uint64_t(r() & 0x000FFFFF) << 32;
                u |= uint64_t(r());
                internal::Double d = internal::Double(u);
 
                char buffer[32];
                *internal::dtoa(d.Value(), buffer) = '\0';
 
                StringStream s(buffer);
                ParseDoubleHandler h;
                ASSERT_EQ(kParseErrorNone, reader.Parse<fullPrecision ? kParseFullPrecisionFlag : 0>(s, h).Code());
                EXPECT_EQ(1u, h.step_);
                internal::Double a(h.actual_);
                if (fullPrecision) {
                    EXPECT_EQ(d.Uint64Value(), a.Uint64Value());
                    if (d.Uint64Value() != a.Uint64Value())
                        printf("  String: %s\n  Actual: %.17g\nExpected: %.17g\n", buffer, h.actual_, d.Value());
                }
                else {
                    EXPECT_EQ(d.Sign(), a.Sign()); // for 0.0 != -0.0
                    EXPECT_DOUBLE_EQ(d.Value(), h.actual_);
                }
            }
        }
    }
 
    // Issue #340
    TEST_DOUBLE(fullPrecision, "7.450580596923828e-9", 7.450580596923828e-9);
    {
        internal::Double d(1.0);
        for (int i = 0; i < 324; i++) {
            char buffer[32];
            *internal::dtoa(d.Value(), buffer) = '\0';
 
            StringStream s(buffer);
            ParseDoubleHandler h;
            Reader reader;
            ASSERT_EQ(kParseErrorNone, reader.Parse<fullPrecision ? kParseFullPrecisionFlag : 0>(s, h).Code());
            EXPECT_EQ(1u, h.step_);
            internal::Double a(h.actual_);
            if (fullPrecision) {
                EXPECT_EQ(d.Uint64Value(), a.Uint64Value());
                if (d.Uint64Value() != a.Uint64Value())
                    printf("  String: %s\n  Actual: %.17g\nExpected: %.17g\n", buffer, h.actual_, d.Value());
            }
            else {
                EXPECT_EQ(d.Sign(), a.Sign()); // for 0.0 != -0.0
                EXPECT_DOUBLE_EQ(d.Value(), h.actual_);
            }
 
 
            d = d.Value() * 0.5;
        }
    }
 
    // Issue 1249
    TEST_DOUBLE(fullPrecision, "0e100", 0.0);
 
    // Issue 1251
    TEST_DOUBLE(fullPrecision, "128.74836467836484838364836483643636483648e-336", 0.0);
 
    // Issue 1256
    TEST_DOUBLE(fullPrecision,
        "6223372036854775296.1701512723685473547372536854755293372036854685477"
        "529752233737201701512337200972013723685473123372036872036854236854737"
        "247372368372367752975258547752975254729752547372368737201701512354737"
        "83723677529752585477247372368372368547354737253685475529752",
        6223372036854775808.0);
 
#if 0
    // Test (length + exponent) overflow
    TEST_DOUBLE(fullPrecision, "0e+2147483647", 0.0);
    TEST_DOUBLE(fullPrecision, "0e-2147483648", 0.0);
    TEST_DOUBLE(fullPrecision, "1e-2147483648", 0.0);
    TEST_DOUBLE(fullPrecision, "0e+9223372036854775807", 0.0);
    TEST_DOUBLE(fullPrecision, "0e-9223372036854775808", 0.0);
#endif
 
    if (fullPrecision)
    {
        TEST_DOUBLE(fullPrecision, "1e-325", 0.0);
        TEST_DOUBLE(fullPrecision, "1e-324", 0.0);
        TEST_DOUBLE(fullPrecision, "2e-324", 0.0);
        TEST_DOUBLE(fullPrecision, "2.4703282292062327e-324", 0.0);
        TEST_DOUBLE(fullPrecision, "2.4703282292062328e-324", 5e-324);
        TEST_DOUBLE(fullPrecision, "2.48e-324",5e-324);
        TEST_DOUBLE(fullPrecision, "2.5e-324", 5e-324);
 
        // Slightly above max-normal
        TEST_DOUBLE(fullPrecision, "1.7976931348623158e+308", 1.7976931348623158e+308);
 
        TEST_DOUBLE(fullPrecision,
            "17976931348623157081452742373170435679807056752584499659891747680315726"
            "07800285387605895586327668781715404589535143824642343213268894641827684"
            "67546703537516986049910576551282076245490090389328944075868508455133942"
            "30458323690322294816580855933212334827479782620414472316873817718091929"
            "9881250404026184124858368",
            (std::numeric_limits<double>::max)());
 
        TEST_DOUBLE(fullPrecision,
            "243546080556034731077856379609316893158278902575447060151047"
            "212703405344938119816206067372775299130836050315842578309818"
            "316450894337978612745889730079163798234256495613858256849283"
            "467066859489192118352020514036083287319232435355752493038825"
            "828481044358810649108367633313557305310641892225870327827273"
            "41408256.000000",
            2.4354608055603473e+307);
        // 9007199254740991 * 2^971 (max normal)
        TEST_DOUBLE(fullPrecision,
            "1.797693134862315708145274237317043567980705675258449965989174768031572607800285"
            "38760589558632766878171540458953514382464234321326889464182768467546703537516986"
            "04991057655128207624549009038932894407586850845513394230458323690322294816580855"
            "9332123348274797826204144723168738177180919299881250404026184124858368e+308",
            1.797693134862315708e+308 //        0x1.fffffffffffffp1023
            );
#if 0
        // TODO:
        // Should work at least in full-precision mode...
        TEST_DOUBLE(fullPrecision,
            "0.00000000000000000000000000000000000000000000000000000000000"
            "0000000000000000000000000000000000000000000000000000000000000"
            "0000000000000000000000000000000000000000000000000000000000000"
            "0000000000000000000000000000000000000000000000000000000000000"
            "0000000000000000000000000000000000000000000000000000000000000"
            "0000000000000000000024703282292062327208828439643411068618252"
            "9901307162382212792841250337753635104375932649918180817996189"
            "8982823477228588654633283551779698981993873980053909390631503"
            "5659515570226392290858392449105184435931802849936536152500319"
            "3704576782492193656236698636584807570015857692699037063119282"
            "7955855133292783433840935197801553124659726357957462276646527"
            "2827220056374006485499977096599470454020828166226237857393450"
            "7363390079677619305775067401763246736009689513405355374585166"
            "6113422376667860416215968046191446729184030053005753084904876"
            "5391711386591646239524912623653881879636239373280423891018672"
            "3484976682350898633885879256283027559956575244555072551893136"
            "9083625477918694866799496832404970582102851318545139621383772"
            "2826145437693412532098591327667236328125",
            0.0);
#endif
        // 9007199254740991 * 2^-1074 = (2^53 - 1) * 2^-1074
        TEST_DOUBLE(fullPrecision,
            "4.450147717014402272114819593418263951869639092703291296046852219449644444042153"
            "89103305904781627017582829831782607924221374017287738918929105531441481564124348"
            "67599762821265346585071045737627442980259622449029037796981144446145705102663115"
            "10031828794952795966823603998647925096578034214163701381261333311989876551545144"
            "03152612538132666529513060001849177663286607555958373922409899478075565940981010"
            "21612198814605258742579179000071675999344145086087205681577915435923018910334964"
            "86942061405218289243144579760516365090360651414037721744226256159024466852576737"
            "24464300755133324500796506867194913776884780053099639677097589658441378944337966"
            "21993967316936280457084866613206797017728916080020698679408551343728867675409720"
            "757232455434770912461317493580281734466552734375e-308",
            4.450147717014402272e-308 //        0x1.fffffffffffffp-1022
            );
        // 9007199254740990 * 2^-1074
        TEST_DOUBLE(fullPrecision,
            "4.450147717014401778049173752171719775300846224481918930987049605124880018456471"
            "39035755177760751831052846195619008686241717547743167145836439860405887584484471"
            "19639655002484083577939142623582164522087943959208000909794783876158397872163051"
            "22622675229968408654350206725478309956546318828765627255022767720818849892988457"
            "26333908582101604036318532842699932130356061901518261174396928478121372742040102"
            "17446565569357687263889031732270082446958029584739170416643195242132750803227473"
            "16608838720742955671061336566907126801014814608027120593609275183716632624844904"
            "31985250929886016737037234388448352929102742708402644340627409931664203093081360"
            "70794835812045179006047003875039546061891526346421705014598610179523165038319441"
            "51446491086954182492263498716056346893310546875e-308",
            4.450147717014401778e-308 //        0x1.ffffffffffffep-1022
            );
        // half way between the two numbers above.
        // round to nearest even.
        TEST_DOUBLE(fullPrecision,
            "4.450147717014402025081996672794991863585242658592605113516950912287262231249312"
            "64069530541271189424317838013700808305231545782515453032382772695923684574304409"
            "93619708911874715081505094180604803751173783204118519353387964161152051487413083"
            "16327252012460602310586905362063117526562176521464664318142050516404363222266800"
            "64743260560117135282915796422274554896821334728738317548403413978098469341510556"
            "19529382191981473003234105366170879223151087335413188049110555339027884856781219"
            "01775450062980622457102958163711745945687733011032421168917765671370549738710820"
            "78224775842509670618916870627821633352993761380751142008862499795052791018709663"
            "46394401564490729731565935244123171539810221213221201847003580761626016356864581"
            "1358486831521563686919762403704226016998291015625e-308",
            4.450147717014401778e-308 //        0x1.ffffffffffffep-1022
            );
        TEST_DOUBLE(fullPrecision,
            "4.450147717014402025081996672794991863585242658592605113516950912287262231249312"
            "64069530541271189424317838013700808305231545782515453032382772695923684574304409"
            "93619708911874715081505094180604803751173783204118519353387964161152051487413083"
            "16327252012460602310586905362063117526562176521464664318142050516404363222266800"
            "64743260560117135282915796422274554896821334728738317548403413978098469341510556"
            "19529382191981473003234105366170879223151087335413188049110555339027884856781219"
            "01775450062980622457102958163711745945687733011032421168917765671370549738710820"
            "78224775842509670618916870627821633352993761380751142008862499795052791018709663"
            "46394401564490729731565935244123171539810221213221201847003580761626016356864581"
            "13584868315215636869197624037042260169982910156250000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000e-308",
            4.450147717014401778e-308 //        0x1.ffffffffffffep-1022
            );
#if 0
        // ... round up
        // TODO:
        // Should work at least in full-precision mode...
        TEST_DOUBLE(fullPrecision,
            "4.450147717014402025081996672794991863585242658592605113516950912287262231249312"
            "64069530541271189424317838013700808305231545782515453032382772695923684574304409"
            "93619708911874715081505094180604803751173783204118519353387964161152051487413083"
            "16327252012460602310586905362063117526562176521464664318142050516404363222266800"
            "64743260560117135282915796422274554896821334728738317548403413978098469341510556"
            "19529382191981473003234105366170879223151087335413188049110555339027884856781219"
            "01775450062980622457102958163711745945687733011032421168917765671370549738710820"
            "78224775842509670618916870627821633352993761380751142008862499795052791018709663"
            "46394401564490729731565935244123171539810221213221201847003580761626016356864581"
            "13584868315215636869197624037042260169982910156250000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000001e-308",
            4.450147717014402272e-308 //        0x1.fffffffffffffp-1022
            );
#endif
        // ... round down
        TEST_DOUBLE(fullPrecision,
            "4.450147717014402025081996672794991863585242658592605113516950912287262231249312"
            "64069530541271189424317838013700808305231545782515453032382772695923684574304409"
            "93619708911874715081505094180604803751173783204118519353387964161152051487413083"
            "16327252012460602310586905362063117526562176521464664318142050516404363222266800"
            "64743260560117135282915796422274554896821334728738317548403413978098469341510556"
            "19529382191981473003234105366170879223151087335413188049110555339027884856781219"
            "01775450062980622457102958163711745945687733011032421168917765671370549738710820"
            "78224775842509670618916870627821633352993761380751142008862499795052791018709663"
            "46394401564490729731565935244123171539810221213221201847003580761626016356864581"
            "13584868315215636869197624037042260169982910156249999999999999999999999999999999"
            "99999999999999999999999999999999999999999999999999999999999999999999999999999999"
            "99999999999999999999999999999999999999999999999999999999999999999999999999999999e-308",
            4.450147717014401778e-308 //        0x1.ffffffffffffep-1022
            );
        // Slightly below half way between max-normal and infinity.
        // Should round down.
        TEST_DOUBLE(fullPrecision,
            "1.797693134862315807937289714053034150799341327100378269361737789804449682927647"
            "50946649017977587207096330286416692887910946555547851940402630657488671505820681"
            "90890200070838367627385484581771153176447573027006985557136695962284291481986083"
            "49364752927190741684443655107043427115596995080930428801779041744977919999999999"
            "99999999999999999999999999999999999999999999999999999999999999999999999999999999"
            "99999999999999999999999999999999999999999999999999999999999999999999999999999999"
            "99999999999999999999999999999999999999999999999999999999999999999999999999999999"
            "99999999999999999999999999999999999999999999999999999999999999999999999999999999"
            "99999999999999999999999999999999999999999999999999999999999999999999999999999999"
            "99999999999999999999999999999999999999999999999999999999999999999999999999999999"
            "99999999999999999999999999999999999999999999999999999999999999999999999999999999"
            "99999999999999999999999999999999999999999999999999999999999999999999999999999999"
            "99999999999999999999999999999999999999999999999999999999999999999999999999999999"
            "99999999999999999999999999999999999999999999999999999999999999999999999999999999"
            "99999999999999999999999999999999999999999999999999999999999999999999999999999999"
            "99999999999999999999999999999999999999999999999999999999999999999999999999999999e+308",
            1.797693134862315708e+308 //        0x1.fffffffffffffp1023
            );
    }
 
#undef TEST_DOUBLE
}
 
TEST(Reader, ParseNumber_NormalPrecisionDouble) {
    TestParseDouble<false>();
}
 
TEST(Reader, ParseNumber_FullPrecisionDouble) {
    TestParseDouble<true>();
}
 
TEST(Reader, ParseNumber_NormalPrecisionError) {
    static unsigned count = 1000000;
    Random r;
 
    double ulpSum = 0.0;
    double ulpMax = 0.0;
    for (unsigned i = 0; i < count; i++) {
        internal::Double e, a;
        do {
            // Need to call r() in two statements for cross-platform coherent sequence.
            uint64_t u = uint64_t(r()) << 32;
            u |= uint64_t(r());
            e = u;
        } while (e.IsNan() || e.IsInf() || !e.IsNormal());
 
        char buffer[32];
        *internal::dtoa(e.Value(), buffer) = '\0';
 
        StringStream s(buffer);
        ParseDoubleHandler h;
        Reader reader;
        ASSERT_EQ(kParseErrorNone, reader.Parse(s, h).Code());
        EXPECT_EQ(1u, h.step_);
 
        a = h.actual_;
        uint64_t bias1 = e.ToBias();
        uint64_t bias2 = a.ToBias();
        double ulp = static_cast<double>(bias1 >= bias2 ? bias1 - bias2 : bias2 - bias1);
        ulpMax = (std::max)(ulpMax, ulp);
        ulpSum += ulp;
    }
    printf("ULP Average = %g, Max = %g \n", ulpSum / count, ulpMax);
}
 
template<bool fullPrecision>
static void TestParseNumberError() {
#define TEST_NUMBER_ERROR(errorCode, str, errorOffset, streamPos) \
    { \
        char buffer[2048]; \
        ASSERT_LT(std::strlen(str), 2048u); \
        sprintf(buffer, "%s", str); \
        InsituStringStream s(buffer); \
        BaseReaderHandler<> h; \
        Reader reader; \
        EXPECT_FALSE(reader.Parse<fullPrecision ? kParseFullPrecisionFlag : 0>(s, h)); \
        EXPECT_EQ(errorCode, reader.GetParseErrorCode());\
        EXPECT_EQ(errorOffset, reader.GetErrorOffset());\
        EXPECT_EQ(streamPos, s.Tell());\
    }
 
    // Number too big to be stored in double.
    {
        char n1e309[311];   // '1' followed by 309 '0'
        n1e309[0] = '1';
        for (int i = 1; i < 310; i++)
            n1e309[i] = '0';
        n1e309[310] = '\0';
        TEST_NUMBER_ERROR(kParseErrorNumberTooBig, n1e309, 0u, 310u);
    }
    TEST_NUMBER_ERROR(kParseErrorNumberTooBig, "1e309", 0u, 5u);
 
    // Miss fraction part in number.
    TEST_NUMBER_ERROR(kParseErrorNumberMissFraction, "1.", 2u, 2u);
    TEST_NUMBER_ERROR(kParseErrorNumberMissFraction, "1.a", 2u, 2u);
 
    // Miss exponent in number.
    TEST_NUMBER_ERROR(kParseErrorNumberMissExponent, "1e", 2u, 2u);
    TEST_NUMBER_ERROR(kParseErrorNumberMissExponent, "1e_", 2u, 2u);
 
    // Issue 849
    TEST_NUMBER_ERROR(kParseErrorNumberTooBig, "1.8e308", 0u, 7u);
    TEST_NUMBER_ERROR(kParseErrorNumberTooBig, "5e308", 0u, 5u);
    TEST_NUMBER_ERROR(kParseErrorNumberTooBig, "1e309", 0u, 5u);
    TEST_NUMBER_ERROR(kParseErrorNumberTooBig, "1.0e310", 0u, 7u);
    TEST_NUMBER_ERROR(kParseErrorNumberTooBig, "1.00e310", 0u, 8u);
    TEST_NUMBER_ERROR(kParseErrorNumberTooBig, "-1.8e308", 0u, 8u);
    TEST_NUMBER_ERROR(kParseErrorNumberTooBig, "-1e309", 0u, 6u);
 
    // Issue 1253
    TEST_NUMBER_ERROR(kParseErrorNumberTooBig, "2e308", 0u, 5u);
 
    // Issue 1259
    TEST_NUMBER_ERROR(kParseErrorNumberTooBig,
        "88474320368547737236837236775298547354737253685475547552933720368546854775297525"
        "29337203685468547770151233720097201372368547312337203687203685423685123372036872"
        "03685473724737236837236775297525854775297525472975254737236873720170151235473783"
        "7236737247372368772473723683723456789012E66", 0u, 283u);
 
#if 0
    // Test (length + exponent) overflow
    TEST_NUMBER_ERROR(kParseErrorNumberTooBig, "1e+2147483647", 0u, 13u);
    TEST_NUMBER_ERROR(kParseErrorNumberTooBig, "1e+9223372036854775807", 0u, 22u);
    TEST_NUMBER_ERROR(kParseErrorNumberTooBig, "1e+10000", 0u, 8u);
    TEST_NUMBER_ERROR(kParseErrorNumberTooBig, "1e+50000", 0u, 8u);
#endif
 
    // 9007199254740992 * 2^971 ("infinity")
    TEST_NUMBER_ERROR(kParseErrorNumberTooBig,
        "1.797693134862315907729305190789024733617976978942306572734300811577326758055009"
        "63132708477322407536021120113879871393357658789768814416622492847430639474124377"
        "76789342486548527630221960124609411945308295208500576883815068234246288147391311"
        "0540827237163350510684586298239947245938479716304835356329624224137216e+308", 0u, 315u);
 
    // TODO:
    // These tests (currently) fail in normal-precision mode
    if (fullPrecision)
    {
        // Half way between max-normal and infinity
        // Should round to infinity in nearest-even mode.
        TEST_NUMBER_ERROR(kParseErrorNumberTooBig,
            "1.797693134862315807937289714053034150799341327100378269361737789804449682927647"
            "50946649017977587207096330286416692887910946555547851940402630657488671505820681"
            "90890200070838367627385484581771153176447573027006985557136695962284291481986083"
            "49364752927190741684443655107043427115596995080930428801779041744977920000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000e+308", 0u, 1125u);
        // ...round up
        TEST_NUMBER_ERROR(kParseErrorNumberTooBig,
            "1.797693134862315807937289714053034150799341327100378269361737789804449682927647"
            "50946649017977587207096330286416692887910946555547851940402630657488671505820681"
            "90890200070838367627385484581771153176447573027006985557136695962284291481986083"
            "49364752927190741684443655107043427115596995080930428801779041744977920000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
            "00000000000000000000000000000000000000000000000000000000000000000000000000000001e+308", 0u, 1205u);
    }
 
    TEST_NUMBER_ERROR(kParseErrorNumberTooBig,
        "10000000000000000000000000000000000000000000000000000000000000000000000000000000"
        "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
        "00000000000000000000000000000000000000000000000000000000000000000000000000000000"
        "0000000000000000000000000000000000000000000000000000000000000000000001", 0u, 310u);
 
#undef TEST_NUMBER_ERROR
}
 
TEST(Reader, ParseNumberError_NormalPrecisionDouble) {
    TestParseNumberError<false>();
}
 
TEST(Reader, ParseNumberError_FullPrecisionDouble) {
    TestParseNumberError<true>();
}
 
template <typename Encoding>
struct ParseStringHandler : BaseReaderHandler<Encoding, ParseStringHandler<Encoding> > {
    ParseStringHandler() : str_(0), length_(0), copy_() {}
    ~ParseStringHandler() { EXPECT_TRUE(str_ != 0); if (copy_) free(const_cast<typename Encoding::Ch*>(str_)); }
 
    ParseStringHandler(const ParseStringHandler&);
    ParseStringHandler& operator=(const ParseStringHandler&);
 
    bool Default() { ADD_FAILURE(); return false; }
    bool String(const typename Encoding::Ch* str, size_t length, bool copy) {
        EXPECT_EQ(0, str_);
        if (copy) {
            str_ = static_cast<typename Encoding::Ch*>(malloc((length + 1) * sizeof(typename Encoding::Ch)));
            memcpy(const_cast<typename Encoding::Ch*>(str_), str, (length + 1) * sizeof(typename Encoding::Ch));
        }
        else
            str_ = str;
        length_ = length;
        copy_ = copy;
        return true;
    }
 
    const typename Encoding::Ch* str_;
    size_t length_;
    bool copy_;
};
 
TEST(Reader, ParseString) {
#define TEST_STRING(Encoding, e, x) \
    { \
        Encoding::Ch* buffer = StrDup(x); \
        GenericInsituStringStream<Encoding> is(buffer); \
        ParseStringHandler<Encoding> h; \
        GenericReader<Encoding, Encoding> reader; \
        reader.Parse<kParseInsituFlag | kParseValidateEncodingFlag>(is, h); \
        EXPECT_EQ(0, StrCmp<Encoding::Ch>(e, h.str_)); \
        EXPECT_EQ(StrLen(e), h.length_); \
        free(buffer); \
        GenericStringStream<Encoding> s(x); \
        ParseStringHandler<Encoding> h2; \
        GenericReader<Encoding, Encoding> reader2; \
        reader2.Parse(s, h2); \
        EXPECT_EQ(0, StrCmp<Encoding::Ch>(e, h2.str_)); \
        EXPECT_EQ(StrLen(e), h2.length_); \
    }
 
    // String constant L"\xXX" can only specify character code in bytes, which is not endianness-neutral.
    // And old compiler does not support u"" and U"" string literal. So here specify string literal by array of Ch.
    // In addition, GCC 4.8 generates -Wnarrowing warnings when character code >= 128 are assigned to signed integer types.
    // Therefore, utype is added for declaring unsigned array, and then cast it to Encoding::Ch.
#define ARRAY(...) { __VA_ARGS__ }
#define TEST_STRINGARRAY(Encoding, utype, array, x) \
    { \
        static const utype ue[] = array; \
        static const Encoding::Ch* e = reinterpret_cast<const Encoding::Ch *>(&ue[0]); \
        TEST_STRING(Encoding, e, x); \
    }
 
#define TEST_STRINGARRAY2(Encoding, utype, earray, xarray) \
    { \
        static const utype ue[] = earray; \
        static const utype xe[] = xarray; \
        static const Encoding::Ch* e = reinterpret_cast<const Encoding::Ch *>(&ue[0]); \
        static const Encoding::Ch* x = reinterpret_cast<const Encoding::Ch *>(&xe[0]); \
        TEST_STRING(Encoding, e, x); \
    }
 
    TEST_STRING(UTF8<>, "", "\"\"");
    TEST_STRING(UTF8<>, "Hello", "\"Hello\"");
    TEST_STRING(UTF8<>, "Hello\nWorld", "\"Hello\\nWorld\"");
    TEST_STRING(UTF8<>, "\"\\/\b\f\n\r\t", "\"\\\"\\\\/\\b\\f\\n\\r\\t\"");
    TEST_STRING(UTF8<>, "\x24", "\"\\u0024\"");         // Dollar sign U+0024
    TEST_STRING(UTF8<>, "\xC2\xA2", "\"\\u00A2\"");     // Cents sign U+00A2
    TEST_STRING(UTF8<>, "\xE2\x82\xAC", "\"\\u20AC\""); // Euro sign U+20AC
    TEST_STRING(UTF8<>, "\xF0\x9D\x84\x9E", "\"\\uD834\\uDD1E\"");  // G clef sign U+1D11E
 
    // UTF16
    TEST_STRING(UTF16<>, L"", L"\"\"");
    TEST_STRING(UTF16<>, L"Hello", L"\"Hello\"");
    TEST_STRING(UTF16<>, L"Hello\nWorld", L"\"Hello\\nWorld\"");
    TEST_STRING(UTF16<>, L"\"\\/\b\f\n\r\t", L"\"\\\"\\\\/\\b\\f\\n\\r\\t\"");
    TEST_STRINGARRAY(UTF16<>, wchar_t, ARRAY(0x0024, 0x0000), L"\"\\u0024\"");
    TEST_STRINGARRAY(UTF16<>, wchar_t, ARRAY(0x00A2, 0x0000), L"\"\\u00A2\"");  // Cents sign U+00A2
    TEST_STRINGARRAY(UTF16<>, wchar_t, ARRAY(0x20AC, 0x0000), L"\"\\u20AC\"");  // Euro sign U+20AC
    TEST_STRINGARRAY(UTF16<>, wchar_t, ARRAY(0xD834, 0xDD1E, 0x0000), L"\"\\uD834\\uDD1E\"");   // G clef sign U+1D11E
 
    // UTF32
    TEST_STRINGARRAY2(UTF32<>, unsigned, ARRAY('\0'), ARRAY('\"', '\"', '\0'));
    TEST_STRINGARRAY2(UTF32<>, unsigned, ARRAY('H', 'e', 'l', 'l', 'o', '\0'), ARRAY('\"', 'H', 'e', 'l', 'l', 'o', '\"', '\0'));
    TEST_STRINGARRAY2(UTF32<>, unsigned, ARRAY('H', 'e', 'l', 'l', 'o', '\n', 'W', 'o', 'r', 'l', 'd', '\0'), ARRAY('\"', 'H', 'e', 'l', 'l', 'o', '\\', 'n', 'W', 'o', 'r', 'l', 'd', '\"', '\0'));
    TEST_STRINGARRAY2(UTF32<>, unsigned, ARRAY('\"', '\\', '/', '\b', '\f', '\n', '\r', '\t', '\0'), ARRAY('\"', '\\', '\"', '\\', '\\', '/', '\\', 'b', '\\', 'f', '\\', 'n', '\\', 'r', '\\', 't', '\"', '\0'));
    TEST_STRINGARRAY2(UTF32<>, unsigned, ARRAY(0x00024, 0x0000), ARRAY('\"', '\\', 'u', '0', '0', '2', '4', '\"', '\0'));
    TEST_STRINGARRAY2(UTF32<>, unsigned, ARRAY(0x000A2, 0x0000), ARRAY('\"', '\\', 'u', '0', '0', 'A', '2', '\"', '\0'));   // Cents sign U+00A2
    TEST_STRINGARRAY2(UTF32<>, unsigned, ARRAY(0x020AC, 0x0000), ARRAY('\"', '\\', 'u', '2', '0', 'A', 'C', '\"', '\0'));   // Euro sign U+20AC
    TEST_STRINGARRAY2(UTF32<>, unsigned, ARRAY(0x1D11E, 0x0000), ARRAY('\"', '\\', 'u', 'D', '8', '3', '4', '\\', 'u', 'D', 'D', '1', 'E', '\"', '\0'));    // G clef sign U+1D11E
 
#undef TEST_STRINGARRAY
#undef ARRAY
#undef TEST_STRING
 
    // Support of null character in string
    {
        StringStream s("\"Hello\\u0000World\"");
        const char e[] = "Hello\0World";
        ParseStringHandler<UTF8<> > h;
        Reader reader;
        reader.Parse(s, h);
        EXPECT_EQ(0, memcmp(e, h.str_, h.length_ + 1));
        EXPECT_EQ(11u, h.length_);
    }
}
 
TEST(Reader, ParseString_Transcoding) {
    const char* x = "\"Hello\"";
    const wchar_t* e = L"Hello";
    GenericStringStream<UTF8<> > is(x);
    GenericReader<UTF8<>, UTF16<> > reader;
    ParseStringHandler<UTF16<> > h;
    reader.Parse(is, h);
    EXPECT_EQ(0, StrCmp<UTF16<>::Ch>(e, h.str_));
    EXPECT_EQ(StrLen(e), h.length_);
}
 
TEST(Reader, ParseString_TranscodingWithValidation) {
    const char* x = "\"Hello\"";
    const wchar_t* e = L"Hello";
    GenericStringStream<UTF8<> > is(x);
    GenericReader<UTF8<>, UTF16<> > reader;
    ParseStringHandler<UTF16<> > h;
    reader.Parse<kParseValidateEncodingFlag>(is, h);
    EXPECT_EQ(0, StrCmp<UTF16<>::Ch>(e, h.str_));
    EXPECT_EQ(StrLen(e), h.length_);
}
 
TEST(Reader, ParseString_NonDestructive) {
    StringStream s("\"Hello\\nWorld\"");
    ParseStringHandler<UTF8<> > h;
    Reader reader;
    reader.Parse(s, h);
    EXPECT_EQ(0, StrCmp("Hello\nWorld", h.str_));
    EXPECT_EQ(11u, h.length_);
}
 
template <typename Encoding>
ParseErrorCode TestString(const typename Encoding::Ch* str) {
    GenericStringStream<Encoding> s(str);
    BaseReaderHandler<Encoding> h;
    GenericReader<Encoding, Encoding> reader;
    reader.template Parse<kParseValidateEncodingFlag>(s, h);
    return reader.GetParseErrorCode();
}
 
TEST(Reader, ParseString_Error) {
#define TEST_STRING_ERROR(errorCode, str, errorOffset, streamPos)\
{\
    GenericStringStream<UTF8<> > s(str);\
    BaseReaderHandler<UTF8<> > h;\
    GenericReader<UTF8<> , UTF8<> > reader;\
    reader.Parse<kParseValidateEncodingFlag>(s, h);\
    EXPECT_EQ(errorCode, reader.GetParseErrorCode());\
    EXPECT_EQ(errorOffset, reader.GetErrorOffset());\
    EXPECT_EQ(streamPos, s.Tell());\
}
 
#define ARRAY(...) { __VA_ARGS__ }
#define TEST_STRINGENCODING_ERROR(Encoding, TargetEncoding, utype, array) \
    { \
        static const utype ue[] = array; \
        static const Encoding::Ch* e = reinterpret_cast<const Encoding::Ch *>(&ue[0]); \
        EXPECT_EQ(kParseErrorStringInvalidEncoding, TestString<Encoding>(e));\
        /* decode error */\
        GenericStringStream<Encoding> s(e);\
        BaseReaderHandler<TargetEncoding> h;\
        GenericReader<Encoding, TargetEncoding> reader;\
        reader.Parse(s, h);\
        EXPECT_EQ(kParseErrorStringInvalidEncoding, reader.GetParseErrorCode());\
    }
 
    // Invalid escape character in string.
    TEST_STRING_ERROR(kParseErrorStringEscapeInvalid, "[\"\\a\"]", 2u, 3u);
 
    // Incorrect hex digit after \\u escape in string.
    TEST_STRING_ERROR(kParseErrorStringUnicodeEscapeInvalidHex, "[\"\\uABCG\"]", 2u, 7u);
 
    // Quotation in \\u escape in string (Issue #288)
    TEST_STRING_ERROR(kParseErrorStringUnicodeEscapeInvalidHex, "[\"\\uaaa\"]", 2u, 7u);
    TEST_STRING_ERROR(kParseErrorStringUnicodeEscapeInvalidHex, "[\"\\uD800\\uFFF\"]", 2u, 13u);
 
    // The surrogate pair in string is invalid.
    TEST_STRING_ERROR(kParseErrorStringUnicodeSurrogateInvalid, "[\"\\uD800X\"]", 2u, 8u);
    TEST_STRING_ERROR(kParseErrorStringUnicodeSurrogateInvalid, "[\"\\uD800\\uFFFF\"]", 2u, 14u);
 
    // Missing a closing quotation mark in string.
    TEST_STRING_ERROR(kParseErrorStringMissQuotationMark, "[\"Test]", 7u, 7u);
 
    // http://www.cl.cam.ac.uk/~mgk25/ucs/examples/UTF-8-test.txt
 
    // 3  Malformed sequences
 
    // 3.1 Unexpected continuation bytes
    {
         char e[] = { '[', '\"', 0, '\"', ']', '\0' };
         for (unsigned char c = 0x80u; c <= 0xBFu; c++) {
            e[2] = static_cast<char>(c);
            ParseErrorCode error = TestString<UTF8<> >(e);
            EXPECT_EQ(kParseErrorStringInvalidEncoding, error);
            if (error != kParseErrorStringInvalidEncoding)
                std::cout << static_cast<unsigned>(c) << std::endl;
         }
    }
 
    // 3.2 Lonely start characters, 3.5 Impossible bytes
    {
        char e[] = { '[', '\"', 0, ' ', '\"', ']', '\0' };
        for (unsigned c = 0xC0u; c <= 0xFFu; c++) {
            e[2] = static_cast<char>(c);
            unsigned streamPos;
            if (c <= 0xC1u)
                streamPos = 3; // 0xC0 - 0xC1
            else if (c <= 0xDFu)
                streamPos = 4; // 0xC2 - 0xDF
            else if (c <= 0xEFu)
                streamPos = 5; // 0xE0 - 0xEF
            else if (c <= 0xF4u)
                streamPos = 6; // 0xF0 - 0xF4
            else
                streamPos = 3; // 0xF5 - 0xFF
            TEST_STRING_ERROR(kParseErrorStringInvalidEncoding, e, 2u, streamPos);
        }
    }
 
    // 4  Overlong sequences
 
    // 4.1  Examples of an overlong ASCII character
    TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xC0u, 0xAFu, '\"', ']', '\0'));
    TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xE0u, 0x80u, 0xAFu, '\"', ']', '\0'));
    TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xF0u, 0x80u, 0x80u, 0xAFu, '\"', ']', '\0'));
 
    // 4.2  Maximum overlong sequences
    TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xC1u, 0xBFu, '\"', ']', '\0'));
    TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xE0u, 0x9Fu, 0xBFu, '\"', ']', '\0'));
    TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xF0u, 0x8Fu, 0xBFu, 0xBFu, '\"', ']', '\0'));
 
    // 4.3  Overlong representation of the NUL character
    TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xC0u, 0x80u, '\"', ']', '\0'));
    TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xE0u, 0x80u, 0x80u, '\"', ']', '\0'));
    TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xF0u, 0x80u, 0x80u, 0x80u, '\"', ']', '\0'));
 
    // 5  Illegal code positions
 
    // 5.1 Single UTF-16 surrogates
    TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xEDu, 0xA0u, 0x80u, '\"', ']', '\0'));
    TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xEDu, 0xADu, 0xBFu, '\"', ']', '\0'));
    TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xEDu, 0xAEu, 0x80u, '\"', ']', '\0'));
    TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xEDu, 0xAFu, 0xBFu, '\"', ']', '\0'));
    TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xEDu, 0xB0u, 0x80u, '\"', ']', '\0'));
    TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xEDu, 0xBEu, 0x80u, '\"', ']', '\0'));
    TEST_STRINGENCODING_ERROR(UTF8<>, UTF16<>, unsigned char, ARRAY('[', '\"', 0xEDu, 0xBFu, 0xBFu, '\"', ']', '\0'));
 
    // Malform UTF-16 sequences
    TEST_STRINGENCODING_ERROR(UTF16<>, UTF8<>, wchar_t, ARRAY('[', '\"', 0xDC00, 0xDC00, '\"', ']', '\0'));
    TEST_STRINGENCODING_ERROR(UTF16<>, UTF8<>, wchar_t, ARRAY('[', '\"', 0xD800, 0xD800, '\"', ']', '\0'));
 
    // Malform UTF-32 sequence
    TEST_STRINGENCODING_ERROR(UTF32<>, UTF8<>, unsigned, ARRAY('[', '\"', 0x110000, '\"', ']', '\0'));
 
    // Malform ASCII sequence
    TEST_STRINGENCODING_ERROR(ASCII<>, UTF8<>, char, ARRAY('[', '\"', char(0x80u), '\"', ']', '\0'));
    TEST_STRINGENCODING_ERROR(ASCII<>, UTF8<>, char, ARRAY('[', '\"', char(0x01u), '\"', ']', '\0'));
    TEST_STRINGENCODING_ERROR(ASCII<>, UTF8<>, char, ARRAY('[', '\"', char(0x1Cu), '\"', ']', '\0'));
 
#undef ARRAY
#undef TEST_STRINGARRAY_ERROR
}
 
template <unsigned count>
struct ParseArrayHandler : BaseReaderHandler<UTF8<>, ParseArrayHandler<count> > {
    ParseArrayHandler() : step_(0) {}
 
    bool Default() { ADD_FAILURE(); return false; }
    bool Uint(unsigned i) { EXPECT_EQ(step_, i); step_++; return true; }
    bool StartArray() { EXPECT_EQ(0u, step_); step_++; return true; }
    bool EndArray(SizeType) { step_++; return true; }
 
    unsigned step_;
};
 
TEST(Reader, ParseEmptyArray) {
    char *json = StrDup("[ ] ");
    InsituStringStream s(json);
    ParseArrayHandler<0> h;
    Reader reader;
    reader.Parse(s, h);
    EXPECT_EQ(2u, h.step_);
    free(json);
}
 
TEST(Reader, ParseArray) {
    char *json = StrDup("[1, 2, 3, 4]");
    InsituStringStream s(json);
    ParseArrayHandler<4> h;
    Reader reader;
    reader.Parse(s, h);
    EXPECT_EQ(6u, h.step_);
    free(json);
}
 
TEST(Reader, ParseArray_Error) {
#define TEST_ARRAY_ERROR(errorCode, str, errorOffset) \
    { \
        unsigned streamPos = errorOffset; \
        char buffer[1001]; \
        strncpy(buffer, str, 1000); \
        InsituStringStream s(buffer); \
        BaseReaderHandler<> h; \
        GenericReader<UTF8<>, UTF8<>, CrtAllocator> reader; \
        EXPECT_FALSE(reader.Parse(s, h)); \
        EXPECT_EQ(errorCode, reader.GetParseErrorCode());\
        EXPECT_EQ(errorOffset, reader.GetErrorOffset());\
        EXPECT_EQ(streamPos, s.Tell());\
    }
 
    // Missing a comma or ']' after an array element.
    TEST_ARRAY_ERROR(kParseErrorArrayMissCommaOrSquareBracket, "[1", 2u);
    TEST_ARRAY_ERROR(kParseErrorArrayMissCommaOrSquareBracket, "[1}", 2u);
    TEST_ARRAY_ERROR(kParseErrorArrayMissCommaOrSquareBracket, "[1 2]", 3u);
 
    // Array cannot have a trailing comma (without kParseTrailingCommasFlag);
    // a value must follow a comma
    TEST_ARRAY_ERROR(kParseErrorValueInvalid, "[1,]", 3u);
 
#undef TEST_ARRAY_ERROR
}
 
struct ParseObjectHandler : BaseReaderHandler<UTF8<>, ParseObjectHandler> {
    ParseObjectHandler() : step_(0) {}
 
    bool Default() { ADD_FAILURE(); return false; }
    bool Null() { EXPECT_EQ(8u, step_); step_++; return true; }
    bool Bool(bool b) {
        switch(step_) {
            case 4: EXPECT_TRUE(b); step_++; return true;
            case 6: EXPECT_FALSE(b); step_++; return true;
            default: ADD_FAILURE(); return false;
        }
    }
    bool Int(int i) {
        switch(step_) {
            case 10: EXPECT_EQ(123, i); step_++; return true;
            case 15: EXPECT_EQ(1, i); step_++; return true;
            case 16: EXPECT_EQ(2, i); step_++; return true;
            case 17: EXPECT_EQ(3, i); step_++; return true;
            default: ADD_FAILURE(); return false;
        }
    }
    bool Uint(unsigned i) { return Int(static_cast<int>(i)); }
    bool Double(double d) { EXPECT_EQ(12u, step_); EXPECT_DOUBLE_EQ(3.1416, d); step_++; return true; }
    bool String(const char* str, size_t, bool) {
        switch(step_) {
            case 1: EXPECT_STREQ("hello", str); step_++; return true;
            case 2: EXPECT_STREQ("world", str); step_++; return true;
            case 3: EXPECT_STREQ("t", str); step_++; return true;
            case 5: EXPECT_STREQ("f", str); step_++; return true;
            case 7: EXPECT_STREQ("n", str); step_++; return true;
            case 9: EXPECT_STREQ("i", str); step_++; return true;
            case 11: EXPECT_STREQ("pi", str); step_++; return true;
            case 13: EXPECT_STREQ("a", str); step_++; return true;
            default: ADD_FAILURE(); return false;
        }
    }
    bool StartObject() { EXPECT_EQ(0u, step_); step_++; return true; }
    bool EndObject(SizeType memberCount) { EXPECT_EQ(19u, step_); EXPECT_EQ(7u, memberCount); step_++; return true; }
    bool StartArray() { EXPECT_EQ(14u, step_); step_++; return true; }
    bool EndArray(SizeType elementCount) { EXPECT_EQ(18u, step_); EXPECT_EQ(3u, elementCount); step_++; return true; }
 
    unsigned step_;
};
 
TEST(Reader, ParseObject) {
    const char* json = "{ \"hello\" : \"world\", \"t\" : true , \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3] } ";
 
    // Insitu
    {
        char* json2 = StrDup(json);
        InsituStringStream s(json2);
        ParseObjectHandler h;
        Reader reader;
        reader.Parse<kParseInsituFlag>(s, h);
        EXPECT_EQ(20u, h.step_);
        free(json2);
    }
 
    // Normal
    {
        StringStream s(json);
        ParseObjectHandler h;
        Reader reader;
        reader.Parse(s, h);
        EXPECT_EQ(20u, h.step_);
    }
}
 
struct ParseEmptyObjectHandler : BaseReaderHandler<UTF8<>, ParseEmptyObjectHandler> {
    ParseEmptyObjectHandler() : step_(0) {}
 
    bool Default() { ADD_FAILURE(); return false; }
    bool StartObject() { EXPECT_EQ(0u, step_); step_++; return true; }
    bool EndObject(SizeType) { EXPECT_EQ(1u, step_); step_++; return true; }
 
    unsigned step_;
};
 
TEST(Reader, Parse_EmptyObject) {
    StringStream s("{ } ");
    ParseEmptyObjectHandler h;
    Reader reader;
    reader.Parse(s, h);
    EXPECT_EQ(2u, h.step_);
}
 
struct ParseMultipleRootHandler : BaseReaderHandler<UTF8<>, ParseMultipleRootHandler> {
    ParseMultipleRootHandler() : step_(0) {}
 
    bool Default() { ADD_FAILURE(); return false; }
    bool StartObject() { EXPECT_EQ(0u, step_); step_++; return true; }
    bool EndObject(SizeType) { EXPECT_EQ(1u, step_); step_++; return true; }
    bool StartArray() { EXPECT_EQ(2u, step_); step_++; return true; }
    bool EndArray(SizeType) { EXPECT_EQ(3u, step_); step_++; return true; }
 
    unsigned step_;
};
 
template <unsigned parseFlags>
void TestMultipleRoot() {
    StringStream s("{}[] a");
    ParseMultipleRootHandler h;
    Reader reader;
    EXPECT_TRUE(reader.Parse<parseFlags>(s, h));
    EXPECT_EQ(2u, h.step_);
    EXPECT_TRUE(reader.Parse<parseFlags>(s, h));
    EXPECT_EQ(4u, h.step_);
    EXPECT_EQ(' ', s.Take());
    EXPECT_EQ('a', s.Take());
}
 
TEST(Reader, Parse_MultipleRoot) {
    TestMultipleRoot<kParseStopWhenDoneFlag>();
}
 
TEST(Reader, ParseIterative_MultipleRoot) {
    TestMultipleRoot<kParseIterativeFlag | kParseStopWhenDoneFlag>();
}
 
template <unsigned parseFlags>
void TestInsituMultipleRoot() {
    char* buffer = strdup("{}[] a");
    InsituStringStream s(buffer);
    ParseMultipleRootHandler h;
    Reader reader;
    EXPECT_TRUE(reader.Parse<kParseInsituFlag | parseFlags>(s, h));
    EXPECT_EQ(2u, h.step_);
    EXPECT_TRUE(reader.Parse<kParseInsituFlag | parseFlags>(s, h));
    EXPECT_EQ(4u, h.step_);
    EXPECT_EQ(' ', s.Take());
    EXPECT_EQ('a', s.Take());
    free(buffer);
}
 
TEST(Reader, ParseInsitu_MultipleRoot) {
    TestInsituMultipleRoot<kParseStopWhenDoneFlag>();
}
 
TEST(Reader, ParseInsituIterative_MultipleRoot) {
    TestInsituMultipleRoot<kParseIterativeFlag | kParseStopWhenDoneFlag>();
}
 
#define TEST_ERROR(errorCode, str, errorOffset) \
    { \
        unsigned streamPos = errorOffset; \
        char buffer[1001]; \
        strncpy(buffer, str, 1000); \
        InsituStringStream s(buffer); \
        BaseReaderHandler<> h; \
        Reader reader; \
        EXPECT_FALSE(reader.Parse(s, h)); \
        EXPECT_EQ(errorCode, reader.GetParseErrorCode());\
        EXPECT_EQ(errorOffset, reader.GetErrorOffset());\
        EXPECT_EQ(streamPos, s.Tell());\
    }
 
TEST(Reader, ParseDocument_Error) {
    // The document is empty.
    TEST_ERROR(kParseErrorDocumentEmpty, "", 0u);
    TEST_ERROR(kParseErrorDocumentEmpty, " ", 1u);
    TEST_ERROR(kParseErrorDocumentEmpty, " \n", 2u);
 
    // The document root must not follow by other values.
    TEST_ERROR(kParseErrorDocumentRootNotSingular, "[] 0", 3u);
    TEST_ERROR(kParseErrorDocumentRootNotSingular, "{} 0", 3u);
    TEST_ERROR(kParseErrorDocumentRootNotSingular, "null []", 5u);
    TEST_ERROR(kParseErrorDocumentRootNotSingular, "0 {}", 2u);
}
 
TEST(Reader, ParseValue_Error) {
    // Invalid value.
    TEST_ERROR(kParseErrorValueInvalid, "nulL", 3u);
    TEST_ERROR(kParseErrorValueInvalid, "truE", 3u);
    TEST_ERROR(kParseErrorValueInvalid, "falsE", 4u);
    TEST_ERROR(kParseErrorValueInvalid, "a]", 0u);
    TEST_ERROR(kParseErrorValueInvalid, ".1", 0u);
}
 
TEST(Reader, ParseObject_Error) {
    // Missing a name for object member.
    TEST_ERROR(kParseErrorObjectMissName, "{1}", 1u);
    TEST_ERROR(kParseErrorObjectMissName, "{:1}", 1u);
    TEST_ERROR(kParseErrorObjectMissName, "{null:1}", 1u);
    TEST_ERROR(kParseErrorObjectMissName, "{true:1}", 1u);
    TEST_ERROR(kParseErrorObjectMissName, "{false:1}", 1u);
    TEST_ERROR(kParseErrorObjectMissName, "{1:1}", 1u);
    TEST_ERROR(kParseErrorObjectMissName, "{[]:1}", 1u);
    TEST_ERROR(kParseErrorObjectMissName, "{{}:1}", 1u);
    TEST_ERROR(kParseErrorObjectMissName, "{xyz:1}", 1u);
 
    // Missing a colon after a name of object member.
    TEST_ERROR(kParseErrorObjectMissColon, "{\"a\" 1}", 5u);
    TEST_ERROR(kParseErrorObjectMissColon, "{\"a\",1}", 4u);
 
    // Must be a comma or '}' after an object member
    TEST_ERROR(kParseErrorObjectMissCommaOrCurlyBracket, "{\"a\":1]", 6u);
 
    // Object cannot have a trailing comma (without kParseTrailingCommasFlag);
    // an object member name must follow a comma
    TEST_ERROR(kParseErrorObjectMissName, "{\"a\":1,}", 7u);
 
    // This tests that MemoryStream is checking the length in Peek().
    {
        MemoryStream ms("{\"a\"", 1);
        BaseReaderHandler<> h;
        Reader reader;
        EXPECT_FALSE(reader.Parse<kParseStopWhenDoneFlag>(ms, h));
        EXPECT_EQ(kParseErrorObjectMissName, reader.GetParseErrorCode());
    }
}
 
#undef TEST_ERROR
 
TEST(Reader, SkipWhitespace) {
    StringStream ss(" A \t\tB\n \n\nC\r\r \rD \t\n\r E");
    const char* expected = "ABCDE";
    for (size_t i = 0; i < 5; i++) {
        SkipWhitespace(ss);
        EXPECT_EQ(expected[i], ss.Take());
    }
}
 
// Test implementing a stream without copy stream optimization.
// Clone from GenericStringStream except that copy constructor is disabled.
template <typename Encoding>
class CustomStringStream {
public:
    typedef typename Encoding::Ch Ch;
 
    CustomStringStream(const Ch *src) : src_(src), head_(src) {}
 
    Ch Peek() const { return *src_; }
    Ch Take() { return *src_++; }
    size_t Tell() const { return static_cast<size_t>(src_ - head_); }
 
    Ch* PutBegin() { RAPIDJSON_ASSERT(false); return 0; }
    void Put(Ch) { RAPIDJSON_ASSERT(false); }
    void Flush() { RAPIDJSON_ASSERT(false); }
    size_t PutEnd(Ch*) { RAPIDJSON_ASSERT(false); return 0; }
 
private:
    // Prohibit copy constructor & assignment operator.
    CustomStringStream(const CustomStringStream&);
    CustomStringStream& operator=(const CustomStringStream&);
 
    const Ch* src_;     
    const Ch* head_;    
};
 
// If the following code is compiled, it should generate compilation error as predicted.
// Because CustomStringStream<> is not copyable via making copy constructor private.
#if 0
namespace rapidjson {
 
template <typename Encoding>
struct StreamTraits<CustomStringStream<Encoding> > {
    enum { copyOptimization = 1 };
};
 
} // namespace rapidjson
#endif
 
TEST(Reader, CustomStringStream) {
    const char* json = "{ \"hello\" : \"world\", \"t\" : true , \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3] } ";
    CustomStringStream<UTF8<char> > s(json);
    ParseObjectHandler h;
    Reader reader;
    reader.Parse(s, h);
    EXPECT_EQ(20u, h.step_);
}
 
#include <sstream>
 
class IStreamWrapper {
public:
    typedef char Ch;
 
    IStreamWrapper(std::istream& is) : is_(is) {}
 
    Ch Peek() const {
        int c = is_.peek();
        return c == std::char_traits<char>::eof() ? '\0' : static_cast<Ch>(c);
    }
 
    Ch Take() {
        int c = is_.get();
        return c == std::char_traits<char>::eof() ? '\0' : static_cast<Ch>(c);
    }
 
    size_t Tell() const { return static_cast<size_t>(is_.tellg()); }
 
    Ch* PutBegin() { assert(false); return 0; }
    void Put(Ch) { assert(false); }
    void Flush() { assert(false); }
    size_t PutEnd(Ch*) { assert(false); return 0; }
 
private:
    IStreamWrapper(const IStreamWrapper&);
    IStreamWrapper& operator=(const IStreamWrapper&);
 
    std::istream& is_;
};
 
TEST(Reader, Parse_IStreamWrapper_StringStream) {
    const char* json = "[1,2,3,4]";
 
    std::stringstream ss(json);
    IStreamWrapper is(ss);
 
    Reader reader;
    ParseArrayHandler<4> h;
    reader.Parse(is, h);
    EXPECT_FALSE(reader.HasParseError());
}
 
// Test iterative parsing.
 
#define TESTERRORHANDLING(text, errorCode, offset)\
{\
    unsigned streamPos = offset; \
    StringStream json(text); \
    BaseReaderHandler<> handler; \
    Reader reader; \
    reader.Parse<kParseIterativeFlag>(json, handler); \
    EXPECT_TRUE(reader.HasParseError()); \
    EXPECT_EQ(errorCode, reader.GetParseErrorCode()); \
    EXPECT_EQ(offset, reader.GetErrorOffset()); \
    EXPECT_EQ(streamPos, json.Tell()); \
}
 
TEST(Reader, IterativeParsing_ErrorHandling) {
    TESTERRORHANDLING("{\"a\": a}", kParseErrorValueInvalid, 6u);
 
    TESTERRORHANDLING("", kParseErrorDocumentEmpty, 0u);
    TESTERRORHANDLING("{}{}", kParseErrorDocumentRootNotSingular, 2u);
 
    TESTERRORHANDLING("{1}", kParseErrorObjectMissName, 1u);
    TESTERRORHANDLING("{\"a\", 1}", kParseErrorObjectMissColon, 4u);
    TESTERRORHANDLING("{\"a\"}", kParseErrorObjectMissColon, 4u);
    TESTERRORHANDLING("{\"a\": 1", kParseErrorObjectMissCommaOrCurlyBracket, 7u);
    TESTERRORHANDLING("[1 2 3]", kParseErrorArrayMissCommaOrSquareBracket, 3u);
    TESTERRORHANDLING("{\"a: 1", kParseErrorStringMissQuotationMark, 6u);
    TESTERRORHANDLING("{\"a\":}", kParseErrorValueInvalid, 5u);
    TESTERRORHANDLING("{\"a\":]", kParseErrorValueInvalid, 5u);
    TESTERRORHANDLING("[1,2,}", kParseErrorValueInvalid, 5u);
    TESTERRORHANDLING("[}]", kParseErrorValueInvalid, 1u);
    TESTERRORHANDLING("[,]", kParseErrorValueInvalid, 1u);
    TESTERRORHANDLING("[1,,]", kParseErrorValueInvalid, 3u);
 
    // Trailing commas are not allowed without kParseTrailingCommasFlag
    TESTERRORHANDLING("{\"a\": 1,}", kParseErrorObjectMissName, 8u);
    TESTERRORHANDLING("[1,2,3,]", kParseErrorValueInvalid, 7u);
 
    // Any JSON value can be a valid root element in RFC7159.
    TESTERRORHANDLING("\"ab", kParseErrorStringMissQuotationMark, 3u);
    TESTERRORHANDLING("truE", kParseErrorValueInvalid, 3u);
    TESTERRORHANDLING("False", kParseErrorValueInvalid, 0u);
    TESTERRORHANDLING("true, false", kParseErrorDocumentRootNotSingular, 4u);
    TESTERRORHANDLING("false, false", kParseErrorDocumentRootNotSingular, 5u);
    TESTERRORHANDLING("nulL", kParseErrorValueInvalid, 3u);
    TESTERRORHANDLING("null , null", kParseErrorDocumentRootNotSingular, 5u);
    TESTERRORHANDLING("1a", kParseErrorDocumentRootNotSingular, 1u);
}
 
template<typename Encoding = UTF8<> >
struct IterativeParsingReaderHandler {
    typedef typename Encoding::Ch Ch;
 
    const static uint32_t LOG_NULL        = 0x10000000;
    const static uint32_t LOG_BOOL        = 0x20000000;
    const static uint32_t LOG_INT         = 0x30000000;
    const static uint32_t LOG_UINT        = 0x40000000;
    const static uint32_t LOG_INT64       = 0x50000000;
    const static uint32_t LOG_UINT64      = 0x60000000;
    const static uint32_t LOG_DOUBLE      = 0x70000000;
    const static uint32_t LOG_STRING      = 0x80000000;
    const static uint32_t LOG_STARTOBJECT = 0x90000000;
    const static uint32_t LOG_KEY         = 0xA0000000;
    const static uint32_t LOG_ENDOBJECT   = 0xB0000000;
    const static uint32_t LOG_STARTARRAY  = 0xC0000000;
    const static uint32_t LOG_ENDARRAY    = 0xD0000000;
 
    const static size_t LogCapacity = 256;
    uint32_t Logs[LogCapacity];
    size_t LogCount;
 
    IterativeParsingReaderHandler() : LogCount(0) {
    }
 
    bool Null() { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_NULL; return true; }
 
    bool Bool(bool) { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_BOOL; return true; }
 
    bool Int(int) { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_INT; return true; }
 
    bool Uint(unsigned) { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_INT; return true; }
 
    bool Int64(int64_t) { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_INT64; return true; }
 
    bool Uint64(uint64_t) { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_UINT64; return true; }
 
    bool Double(double) { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_DOUBLE; return true; }
 
    bool RawNumber(const Ch*, SizeType, bool) { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_STRING; return true; }
 
    bool String(const Ch*, SizeType, bool) { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_STRING; return true; }
 
    bool StartObject() { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_STARTOBJECT; return true; }
 
    bool Key (const Ch*, SizeType, bool) { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_KEY; return true; }
 
    bool EndObject(SizeType c) {
        RAPIDJSON_ASSERT(LogCount < LogCapacity);
        RAPIDJSON_ASSERT((static_cast<uint32_t>(c) & 0xF0000000) == 0);
        Logs[LogCount++] = LOG_ENDOBJECT | static_cast<uint32_t>(c);
        return true;
    }
 
    bool StartArray() { RAPIDJSON_ASSERT(LogCount < LogCapacity); Logs[LogCount++] = LOG_STARTARRAY; return true; }
 
    bool EndArray(SizeType c) {
        RAPIDJSON_ASSERT(LogCount < LogCapacity);
        RAPIDJSON_ASSERT((static_cast<uint32_t>(c) & 0xF0000000) == 0);
        Logs[LogCount++] = LOG_ENDARRAY | static_cast<uint32_t>(c);
        return true;
    }
};
 
TEST(Reader, IterativeParsing_General) {
    {
        StringStream is("[1, {\"k\": [1, 2]}, null, false, true, \"string\", 1.2]");
        Reader reader;
        IterativeParsingReaderHandler<> handler;
 
        ParseResult r = reader.Parse<kParseIterativeFlag>(is, handler);
 
        EXPECT_FALSE(r.IsError());
        EXPECT_FALSE(reader.HasParseError());
 
        uint32_t e[] = {
            handler.LOG_STARTARRAY,
            handler.LOG_INT,
            handler.LOG_STARTOBJECT,
            handler.LOG_KEY,
            handler.LOG_STARTARRAY,
            handler.LOG_INT,
            handler.LOG_INT,
            handler.LOG_ENDARRAY | 2,
            handler.LOG_ENDOBJECT | 1,
            handler.LOG_NULL,
            handler.LOG_BOOL,
            handler.LOG_BOOL,
            handler.LOG_STRING,
            handler.LOG_DOUBLE,
            handler.LOG_ENDARRAY | 7
        };
 
        EXPECT_EQ(sizeof(e) / sizeof(int), handler.LogCount);
 
        for (size_t i = 0; i < handler.LogCount; ++i) {
            EXPECT_EQ(e[i], handler.Logs[i]) << "i = " << i;
        }
    }
}
 
TEST(Reader, IterativeParsing_Count) {
    {
        StringStream is("[{}, {\"k\": 1}, [1], []]");
        Reader reader;
        IterativeParsingReaderHandler<> handler;
 
        ParseResult r = reader.Parse<kParseIterativeFlag>(is, handler);
 
        EXPECT_FALSE(r.IsError());
        EXPECT_FALSE(reader.HasParseError());
 
        uint32_t e[] = {
            handler.LOG_STARTARRAY,
            handler.LOG_STARTOBJECT,
            handler.LOG_ENDOBJECT | 0,
            handler.LOG_STARTOBJECT,
            handler.LOG_KEY,
            handler.LOG_INT,
            handler.LOG_ENDOBJECT | 1,
            handler.LOG_STARTARRAY,
            handler.LOG_INT,
            handler.LOG_ENDARRAY | 1,
            handler.LOG_STARTARRAY,
            handler.LOG_ENDARRAY | 0,
            handler.LOG_ENDARRAY | 4
        };
 
        EXPECT_EQ(sizeof(e) / sizeof(int), handler.LogCount);
 
        for (size_t i = 0; i < handler.LogCount; ++i) {
            EXPECT_EQ(e[i], handler.Logs[i]) << "i = " << i;
        }
    }
}
 
TEST(Reader, IterativePullParsing_General) {
    {
        IterativeParsingReaderHandler<> handler;
        uint32_t e[] = {
            handler.LOG_STARTARRAY,
            handler.LOG_INT,
            handler.LOG_STARTOBJECT,
            handler.LOG_KEY,
            handler.LOG_STARTARRAY,
            handler.LOG_INT,
            handler.LOG_INT,
            handler.LOG_ENDARRAY | 2,
            handler.LOG_ENDOBJECT | 1,
            handler.LOG_NULL,
            handler.LOG_BOOL,
            handler.LOG_BOOL,
            handler.LOG_STRING,
            handler.LOG_DOUBLE,
            handler.LOG_ENDARRAY | 7
        };
 
        StringStream is("[1, {\"k\": [1, 2]}, null, false, true, \"string\", 1.2]");
        Reader reader;
 
        reader.IterativeParseInit();
        while (!reader.IterativeParseComplete()) {
            size_t oldLogCount = handler.LogCount;
            EXPECT_TRUE(oldLogCount < sizeof(e) / sizeof(int)) << "overrun";
 
            EXPECT_TRUE(reader.IterativeParseNext<kParseDefaultFlags>(is, handler)) << "parse fail";
            EXPECT_EQ(handler.LogCount, oldLogCount + 1) << "handler should be invoked exactly once each time";
            EXPECT_EQ(e[oldLogCount], handler.Logs[oldLogCount]) << "wrong event returned";
        }
 
        EXPECT_FALSE(reader.HasParseError());
        EXPECT_EQ(sizeof(e) / sizeof(int), handler.LogCount) << "handler invoked wrong number of times";
 
        // The handler should not be invoked when the JSON has been fully read, but it should not fail
        size_t oldLogCount = handler.LogCount;
        EXPECT_TRUE(reader.IterativeParseNext<kParseDefaultFlags>(is, handler)) << "parse-next past complete is allowed";
        EXPECT_EQ(handler.LogCount, oldLogCount) << "parse-next past complete should not invoke handler";
        EXPECT_FALSE(reader.HasParseError()) << "parse-next past complete should not generate parse error";
    }
}
 
// Test iterative parsing on kParseErrorTermination.
struct HandlerTerminateAtStartObject : public IterativeParsingReaderHandler<> {
    bool StartObject() { return false; }
};
 
struct HandlerTerminateAtStartArray : public IterativeParsingReaderHandler<> {
    bool StartArray() { return false; }
};
 
struct HandlerTerminateAtEndObject : public IterativeParsingReaderHandler<> {
    bool EndObject(SizeType) { return false; }
};
 
struct HandlerTerminateAtEndArray : public IterativeParsingReaderHandler<> {
    bool EndArray(SizeType) { return false; }
};
 
TEST(Reader, IterativeParsing_ShortCircuit) {
    {
        HandlerTerminateAtStartObject handler;
        Reader reader;
        StringStream is("[1, {}]");
 
        ParseResult r = reader.Parse<kParseIterativeFlag>(is, handler);
 
        EXPECT_TRUE(reader.HasParseError());
        EXPECT_EQ(kParseErrorTermination, r.Code());
        EXPECT_EQ(4u, r.Offset());
    }
 
    {
        HandlerTerminateAtStartArray handler;
        Reader reader;
        StringStream is("{\"a\": []}");
 
        ParseResult r = reader.Parse<kParseIterativeFlag>(is, handler);
 
        EXPECT_TRUE(reader.HasParseError());
        EXPECT_EQ(kParseErrorTermination, r.Code());
        EXPECT_EQ(6u, r.Offset());
    }
 
    {
        HandlerTerminateAtEndObject handler;
        Reader reader;
        StringStream is("[1, {}]");
 
        ParseResult r = reader.Parse<kParseIterativeFlag>(is, handler);
 
        EXPECT_TRUE(reader.HasParseError());
        EXPECT_EQ(kParseErrorTermination, r.Code());
        EXPECT_EQ(5u, r.Offset());
    }
 
    {
        HandlerTerminateAtEndArray handler;
        Reader reader;
        StringStream is("{\"a\": []}");
 
        ParseResult r = reader.Parse<kParseIterativeFlag>(is, handler);
 
        EXPECT_TRUE(reader.HasParseError());
        EXPECT_EQ(kParseErrorTermination, r.Code());
        EXPECT_EQ(7u, r.Offset());
    }
}
 
// For covering BaseReaderHandler default functions
TEST(Reader, BaseReaderHandler_Default) {
    BaseReaderHandler<> h;
    Reader reader;
    StringStream is("[null, true, -1, 1, -1234567890123456789, 1234567890123456789, 3.14, \"s\", { \"a\" : 1 }]");
    EXPECT_TRUE(reader.Parse(is, h));
}
 
template <int e>
struct TerminateHandler {
    bool Null() { return e != 0; }
    bool Bool(bool) { return e != 1; }
    bool Int(int) { return e != 2; }
    bool Uint(unsigned) { return e != 3; }
    bool Int64(int64_t) { return e != 4; }
    bool Uint64(uint64_t) { return e != 5;  }
    bool Double(double) { return e != 6; }
    bool RawNumber(const char*, SizeType, bool) { return e != 7; }
    bool String(const char*, SizeType, bool) { return e != 8; }
    bool StartObject() { return e != 9; }
    bool Key(const char*, SizeType, bool)  { return e != 10; }
    bool EndObject(SizeType) { return e != 11; }
    bool StartArray() { return e != 12; }
    bool EndArray(SizeType) { return e != 13; }
};
 
#define TEST_TERMINATION(e, json)\
{\
    Reader reader;\
    TerminateHandler<e> h;\
    StringStream is(json);\
    EXPECT_FALSE(reader.Parse(is, h));\
    EXPECT_EQ(kParseErrorTermination, reader.GetParseErrorCode());\
}
 
TEST(Reader, ParseTerminationByHandler) {
    TEST_TERMINATION(0, "[null");
    TEST_TERMINATION(1, "[true");
    TEST_TERMINATION(1, "[false");
    TEST_TERMINATION(2, "[-1");
    TEST_TERMINATION(3, "[1");
    TEST_TERMINATION(4, "[-1234567890123456789");
    TEST_TERMINATION(5, "[1234567890123456789");
    TEST_TERMINATION(6, "[0.5]");
    // RawNumber() is never called
    TEST_TERMINATION(8, "[\"a\"");
    TEST_TERMINATION(9, "[{");
    TEST_TERMINATION(10, "[{\"a\"");
    TEST_TERMINATION(11, "[{}");
    TEST_TERMINATION(11, "[{\"a\":1}"); // non-empty object
    TEST_TERMINATION(12, "{\"a\":[");
    TEST_TERMINATION(13, "{\"a\":[]");
    TEST_TERMINATION(13, "{\"a\":[1]"); // non-empty array
}
 
TEST(Reader, ParseComments) {
    const char* json =
    "// Here is a one-line comment.\n"
    "{// And here's another one\n"
    "   /*And here's an in-line one.*/\"hello\" : \"world\","
    "   \"t\" :/* And one with '*' symbol*/true ,"
    "/* A multiline comment\n"
    "   goes here*/"
    "   \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3]"
    "}/*And the last one to be sure */";
 
    StringStream s(json);
    ParseObjectHandler h;
    Reader reader;
    EXPECT_TRUE(reader.Parse<kParseCommentsFlag>(s, h));
    EXPECT_EQ(20u, h.step_);
}
 
TEST(Reader, ParseEmptyInlineComment) {
    const char* json = "{/**/\"hello\" : \"world\", \"t\" : true, \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3] }";
 
    StringStream s(json);
    ParseObjectHandler h;
    Reader reader;
    EXPECT_TRUE(reader.Parse<kParseCommentsFlag>(s, h));
    EXPECT_EQ(20u, h.step_);
}
 
TEST(Reader, ParseEmptyOnelineComment) {
    const char* json = "{//\n\"hello\" : \"world\", \"t\" : true, \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3] }";
 
    StringStream s(json);
    ParseObjectHandler h;
    Reader reader;
    EXPECT_TRUE(reader.Parse<kParseCommentsFlag>(s, h));
    EXPECT_EQ(20u, h.step_);
}
 
TEST(Reader, ParseMultipleCommentsInARow) {
    const char* json =
    "{/* first comment *//* second */\n"
    "/* third */ /*fourth*/// last one\n"
    "\"hello\" : \"world\", \"t\" : true, \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3] }";
 
    StringStream s(json);
    ParseObjectHandler h;
    Reader reader;
    EXPECT_TRUE(reader.Parse<kParseCommentsFlag>(s, h));
    EXPECT_EQ(20u, h.step_);
}
 
TEST(Reader, InlineCommentsAreDisabledByDefault) {
    {
        const char* json = "{/* Inline comment. */\"hello\" : \"world\", \"t\" : true, \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3] }";
 
        StringStream s(json);
        ParseObjectHandler h;
        Reader reader;
        EXPECT_FALSE(reader.Parse<kParseDefaultFlags>(s, h));
    }
 
    {
        const char* json =
        "{\"hello\" : /* Multiline comment starts here\n"
        " continues here\n"
        " and ends here */\"world\", \"t\" :true , \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3] }";
 
        StringStream s(json);
        ParseObjectHandler h;
        Reader reader;
        EXPECT_FALSE(reader.Parse<kParseDefaultFlags>(s, h));
    }
}
 
TEST(Reader, OnelineCommentsAreDisabledByDefault) {
    const char* json = "{// One-line comment\n\"hello\" : \"world\", \"t\" : true , \"f\" : false, \"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3] }";
 
    StringStream s(json);
    ParseObjectHandler h;
    Reader reader;
    EXPECT_FALSE(reader.Parse<kParseDefaultFlags>(s, h));
}
 
TEST(Reader, EofAfterOneLineComment) {
    const char* json = "{\"hello\" : \"world\" // EOF is here -->\0 \n}";
 
    StringStream s(json);
    ParseObjectHandler h;
    Reader reader;
    EXPECT_FALSE(reader.Parse<kParseCommentsFlag>(s, h));
    EXPECT_EQ(kParseErrorObjectMissCommaOrCurlyBracket, reader.GetParseErrorCode());
}
 
TEST(Reader, IncompleteMultilineComment) {
    const char* json = "{\"hello\" : \"world\" /* EOF is here -->\0 */}";
 
    StringStream s(json);
    ParseObjectHandler h;
    Reader reader;
    EXPECT_FALSE(reader.Parse<kParseCommentsFlag>(s, h));
    EXPECT_EQ(kParseErrorUnspecificSyntaxError, reader.GetParseErrorCode());
}
 
TEST(Reader, IncompleteMultilineComment2) {
    const char* json = "{\"hello\" : \"world\" /* *\0 */}";
 
    StringStream s(json);
    ParseObjectHandler h;
    Reader reader;
    EXPECT_FALSE(reader.Parse<kParseCommentsFlag>(s, h));
    EXPECT_EQ(kParseErrorUnspecificSyntaxError, reader.GetParseErrorCode());
}
 
TEST(Reader, UnrecognizedComment) {
    const char* json = "{\"hello\" : \"world\" /! }";
 
    StringStream s(json);
    ParseObjectHandler h;
    Reader reader;
    EXPECT_FALSE(reader.Parse<kParseCommentsFlag>(s, h));
    EXPECT_EQ(kParseErrorUnspecificSyntaxError, reader.GetParseErrorCode());
}
 
struct NumbersAsStringsHandler {
    bool Null() { return true; }
    bool Bool(bool) { return true; }
    bool Int(int) { return true; }
    bool Uint(unsigned) { return true; }
    bool Int64(int64_t) { return true; }
    bool Uint64(uint64_t) { return true;  }
    bool Double(double) { return true; }
    // 'str' is not null-terminated
    bool RawNumber(const char* str, SizeType length, bool) {
        EXPECT_TRUE(str != 0);
        EXPECT_TRUE(expected_len_ == length);
        EXPECT_TRUE(strncmp(str, expected_, length) == 0);
        return true;
    }
    bool String(const char*, SizeType, bool) { return true; }
    bool StartObject() { return true; }
    bool Key(const char*, SizeType, bool) { return true; }
    bool EndObject(SizeType) { return true; }
    bool StartArray() { return true; }
    bool EndArray(SizeType) { return true; }
 
    NumbersAsStringsHandler(const char* expected)
        : expected_(expected)
        , expected_len_(strlen(expected)) {}
 
    const char* expected_;
    size_t expected_len_;
};
 
TEST(Reader, NumbersAsStrings) {
    {
        const char* json = "{ \"pi\": 3.1416 } ";
        StringStream s(json);
        NumbersAsStringsHandler h("3.1416");
        Reader reader;
        EXPECT_TRUE(reader.Parse<kParseNumbersAsStringsFlag>(s, h));
    }
    {
        char* json = StrDup("{ \"pi\": 3.1416 } ");
        InsituStringStream s(json);
        NumbersAsStringsHandler h("3.1416");
        Reader reader;
        EXPECT_TRUE(reader.Parse<kParseInsituFlag|kParseNumbersAsStringsFlag>(s, h));
        free(json);
    }
    {
        const char* json = "{ \"gigabyte\": 1.0e9 } ";
        StringStream s(json);
        NumbersAsStringsHandler h("1.0e9");
        Reader reader;
        EXPECT_TRUE(reader.Parse<kParseNumbersAsStringsFlag>(s, h));
    }
    {
        char* json = StrDup("{ \"gigabyte\": 1.0e9 } ");
        InsituStringStream s(json);
        NumbersAsStringsHandler h("1.0e9");
        Reader reader;
        EXPECT_TRUE(reader.Parse<kParseInsituFlag|kParseNumbersAsStringsFlag>(s, h));
        free(json);
    }
    {
        const char* json = "{ \"pi\": 314.159e-2 } ";
        StringStream s(json);
        NumbersAsStringsHandler h("314.159e-2");
        Reader reader;
        EXPECT_TRUE(reader.Parse<kParseNumbersAsStringsFlag>(s, h));
    }
    {
        char* json = StrDup("{ \"gigabyte\": 314.159e-2 } ");
        InsituStringStream s(json);
        NumbersAsStringsHandler h("314.159e-2");
        Reader reader;
        EXPECT_TRUE(reader.Parse<kParseInsituFlag|kParseNumbersAsStringsFlag>(s, h));
        free(json);
    }
    {
        const char* json = "{ \"negative\": -1.54321 } ";
        StringStream s(json);
        NumbersAsStringsHandler h("-1.54321");
        Reader reader;
        EXPECT_TRUE(reader.Parse<kParseNumbersAsStringsFlag>(s, h));
    }
    {
        char* json = StrDup("{ \"negative\": -1.54321 } ");
        InsituStringStream s(json);
        NumbersAsStringsHandler h("-1.54321");
        Reader reader;
        EXPECT_TRUE(reader.Parse<kParseInsituFlag|kParseNumbersAsStringsFlag>(s, h));
        free(json);
    }
    {
        const char* json = "{ \"pi\": 314.159e-2 } ";
        std::stringstream ss(json);
        IStreamWrapper s(ss);
        NumbersAsStringsHandler h("314.159e-2");
        Reader reader;
        EXPECT_TRUE(reader.Parse<kParseNumbersAsStringsFlag>(s, h));
    }
    {
        char n1e319[321];   // '1' followed by 319 '0'
        n1e319[0] = '1';
        for (int i = 1; i < 320; i++)
            n1e319[i] = '0';
        n1e319[320] = '\0';
        StringStream s(n1e319);
        NumbersAsStringsHandler h(n1e319);
        Reader reader;
        EXPECT_TRUE(reader.Parse<kParseNumbersAsStringsFlag>(s, h));
    }
}
 
template <unsigned extraFlags>
void TestTrailingCommas() {
    {
        StringStream s("[1,2,3,]");
        ParseArrayHandler<3> h;
        Reader reader;
        EXPECT_TRUE(reader.Parse<extraFlags|kParseTrailingCommasFlag>(s, h));
        EXPECT_EQ(5u, h.step_);
    }
    {
        const char* json = "{ \"hello\" : \"world\", \"t\" : true , \"f\" : false,"
                "\"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3],}";
        StringStream s(json);
        ParseObjectHandler h;
        Reader reader;
        EXPECT_TRUE(reader.Parse<extraFlags|kParseTrailingCommasFlag>(s, h));
        EXPECT_EQ(20u, h.step_);
    }
    {
        // whitespace around trailing commas
        const char* json = "{ \"hello\" : \"world\", \"t\" : true , \"f\" : false,"
                "\"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3\n,\n]\n,\n} ";
        StringStream s(json);
        ParseObjectHandler h;
        Reader reader;
        EXPECT_TRUE(reader.Parse<extraFlags|kParseTrailingCommasFlag>(s, h));
        EXPECT_EQ(20u, h.step_);
    }
    {
        // comments around trailing commas
        const char* json = "{ \"hello\" : \"world\", \"t\" : true , \"f\" : false, \"n\": null,"
                "\"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3/*test*/,/*test*/]/*test*/,/*test*/}";
        StringStream s(json);
        ParseObjectHandler h;
        Reader reader;
        EXPECT_TRUE(reader.Parse<extraFlags|kParseTrailingCommasFlag|kParseCommentsFlag>(s, h));
        EXPECT_EQ(20u, h.step_);
    }
}
 
TEST(Reader, TrailingCommas) {
    TestTrailingCommas<kParseNoFlags>();
}
 
TEST(Reader, TrailingCommasIterative) {
    TestTrailingCommas<kParseIterativeFlag>();
}
 
template <unsigned extraFlags>
void TestMultipleTrailingCommaErrors() {
    // only a single trailing comma is allowed.
    {
        StringStream s("[1,2,3,,]");
        ParseArrayHandler<3> h;
        Reader reader;
        ParseResult r = reader.Parse<extraFlags|kParseTrailingCommasFlag>(s, h);
        EXPECT_TRUE(reader.HasParseError());
        EXPECT_EQ(kParseErrorValueInvalid, r.Code());
        EXPECT_EQ(7u, r.Offset());
    }
    {
        const char* json = "{ \"hello\" : \"world\", \"t\" : true , \"f\" : false,"
                "\"n\": null, \"i\":123, \"pi\": 3.1416, \"a\":[1, 2, 3,],,}";
        StringStream s(json);
        ParseObjectHandler h;
        Reader reader;
        ParseResult r = reader.Parse<extraFlags|kParseTrailingCommasFlag>(s, h);
        EXPECT_TRUE(reader.HasParseError());
        EXPECT_EQ(kParseErrorObjectMissName, r.Code());
        EXPECT_EQ(95u, r.Offset());
    }
}
 
TEST(Reader, MultipleTrailingCommaErrors) {
    TestMultipleTrailingCommaErrors<kParseNoFlags>();
}
 
TEST(Reader, MultipleTrailingCommaErrorsIterative) {
    TestMultipleTrailingCommaErrors<kParseIterativeFlag>();
}
 
template <unsigned extraFlags>
void TestEmptyExceptForCommaErrors() {
    // not allowed even with trailing commas enabled; the
    // trailing comma must follow a value.
    {
        StringStream s("[,]");
        ParseArrayHandler<3> h;
        Reader reader;
        ParseResult r = reader.Parse<extraFlags|kParseTrailingCommasFlag>(s, h);
        EXPECT_TRUE(reader.HasParseError());
        EXPECT_EQ(kParseErrorValueInvalid, r.Code());
        EXPECT_EQ(1u, r.Offset());
    }
    {
        StringStream s("{,}");
        ParseObjectHandler h;
        Reader reader;
        ParseResult r = reader.Parse<extraFlags|kParseTrailingCommasFlag>(s, h);
        EXPECT_TRUE(reader.HasParseError());
        EXPECT_EQ(kParseErrorObjectMissName, r.Code());
        EXPECT_EQ(1u, r.Offset());
    }
}
 
TEST(Reader, EmptyExceptForCommaErrors) {
    TestEmptyExceptForCommaErrors<kParseNoFlags>();
}
 
TEST(Reader, EmptyExceptForCommaErrorsIterative) {
    TestEmptyExceptForCommaErrors<kParseIterativeFlag>();
}
 
template <unsigned extraFlags>
void TestTrailingCommaHandlerTermination() {
    {
        HandlerTerminateAtEndArray h;
        Reader reader;
        StringStream s("[1,2,3,]");
        ParseResult r = reader.Parse<extraFlags|kParseTrailingCommasFlag>(s, h);
        EXPECT_TRUE(reader.HasParseError());
        EXPECT_EQ(kParseErrorTermination, r.Code());
        EXPECT_EQ(7u, r.Offset());
    }
    {
        HandlerTerminateAtEndObject h;
        Reader reader;
        StringStream s("{\"t\": true, \"f\": false,}");
        ParseResult r = reader.Parse<extraFlags|kParseTrailingCommasFlag>(s, h);
        EXPECT_TRUE(reader.HasParseError());
        EXPECT_EQ(kParseErrorTermination, r.Code());
        EXPECT_EQ(23u, r.Offset());
    }
}
 
TEST(Reader, TrailingCommaHandlerTermination) {
    TestTrailingCommaHandlerTermination<kParseNoFlags>();
}
 
TEST(Reader, TrailingCommaHandlerTerminationIterative) {
    TestTrailingCommaHandlerTermination<kParseIterativeFlag>();
}
 
TEST(Reader, ParseNanAndInfinity) {
#define TEST_NAN_INF(str, x) \
    { \
        { \
            StringStream s(str); \
            ParseDoubleHandler h; \
            Reader reader; \
            ASSERT_EQ(kParseErrorNone, reader.Parse<kParseNanAndInfFlag>(s, h).Code()); \
            EXPECT_EQ(1u, h.step_); \
            internal::Double e(x), a(h.actual_); \
            EXPECT_EQ(e.IsNan(), a.IsNan()); \
            EXPECT_EQ(e.IsInf(), a.IsInf()); \
            if (!e.IsNan()) \
                EXPECT_EQ(e.Sign(), a.Sign()); \
        } \
        { \
            const char* json = "{ \"naninfdouble\": " str " } "; \
            StringStream s(json); \
            NumbersAsStringsHandler h(str); \
            Reader reader; \
            EXPECT_TRUE(reader.Parse<kParseNumbersAsStringsFlag|kParseNanAndInfFlag>(s, h)); \
        } \
        { \
            char* json = StrDup("{ \"naninfdouble\": " str " } "); \
            InsituStringStream s(json); \
            NumbersAsStringsHandler h(str); \
            Reader reader; \
            EXPECT_TRUE(reader.Parse<kParseInsituFlag|kParseNumbersAsStringsFlag|kParseNanAndInfFlag>(s, h)); \
            free(json); \
        } \
    }
#define TEST_NAN_INF_ERROR(errorCode, str, errorOffset) \
    { \
        unsigned streamPos = errorOffset; \
        char buffer[1001]; \
        strncpy(buffer, str, 1000); \
        InsituStringStream s(buffer); \
        BaseReaderHandler<> h; \
        Reader reader; \
        EXPECT_FALSE(reader.Parse<kParseNanAndInfFlag>(s, h)); \
        EXPECT_EQ(errorCode, reader.GetParseErrorCode());\
        EXPECT_EQ(errorOffset, reader.GetErrorOffset());\
        EXPECT_EQ(streamPos, s.Tell());\
    }
 
    double nan = std::numeric_limits<double>::quiet_NaN();
    double inf = std::numeric_limits<double>::infinity();
 
    TEST_NAN_INF("NaN", nan);
    TEST_NAN_INF("-NaN", nan);
    TEST_NAN_INF("Inf", inf);
    TEST_NAN_INF("Infinity", inf);
    TEST_NAN_INF("-Inf", -inf);
    TEST_NAN_INF("-Infinity", -inf);
    TEST_NAN_INF_ERROR(kParseErrorValueInvalid, "NInf", 1u);
    TEST_NAN_INF_ERROR(kParseErrorValueInvalid, "NaInf", 2u);
    TEST_NAN_INF_ERROR(kParseErrorValueInvalid, "INan", 1u);
    TEST_NAN_INF_ERROR(kParseErrorValueInvalid, "InNan", 2u);
    TEST_NAN_INF_ERROR(kParseErrorValueInvalid, "nan", 1u);
    TEST_NAN_INF_ERROR(kParseErrorValueInvalid, "-nan", 1u);
    TEST_NAN_INF_ERROR(kParseErrorValueInvalid, "NAN", 1u);
    TEST_NAN_INF_ERROR(kParseErrorValueInvalid, "-Infinty", 6u);
 
#undef TEST_NAN_INF_ERROR
#undef TEST_NAN_INF
}
 
RAPIDJSON_DIAG_POP